Connecting Smart Devices (Mx666) - BenQ MX666 User Manual

• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, check that the video source device is turned on and operating correctly. Also check
that the signal cables have been connected correctly.

Connecting smart devices (MX666)

The projector can project the content directly from a MHL compatible smart device. Using
a HDMI to Micro USB cable or a HDMI to Micro USB adaptor, you can connect your smart
devices to the projector and then enjoy your content on the big screen.
Some smart devices may not be compatible to the cable that you use. Please consult the manufacturer of your
smart device for detailed information.
Using a HDMI to Micro USB cable
1. Take a HDMI to Micro USB cable and connect one end to the HDMI input connector
on the projector.
2. Connect the other end to the Micro USB output socket on your smart device.
3. Switch to the HDMI/MHL input source. To switch input signal, see
signal" on page 28
Using a HDMI to Micro USB adaptor and a HDMI cable
1. Take a HDMI cable and connect one end to the HDMI input connector on the
projector.
2. Connect the other to the HDMI input socket on the adaptor.
3. Connect the other of the adaptor to the Micro USB output socket on your smart
device.
4. Switch to the HDMI/MHL input source. To switch input signal, see
signal" on page 28
for details.
for details.
"Switching input
"Switching input
Power
Connection 21