Configuring your Storage
Storage Status Tables
Storage Status Tables
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
The Storage Status page include the following tables:
Disk Status Table
The Disk Status table lists each of the physical disks installed in the NSS. The
table is made up of the following columns:
•
Port: The port number on the NSS in which the disk is installed.
•
Model: The model of the disk drive. This information is read from the disk
drive.
•
Size: The size of the disk drive.
•
Health: The system monitors each disk drive and reports the condition of
the disk drive. Options include:
-
Passed: The disk drive has passed the S.M.A.R.T. test and is considered
fully operational. The Error LED on the disk drive is off.
-
Failing: The disk drive has failed the S.M.A.R.T. test and is predicated to
fail. The red Error LED on the disk drive is blinking.
-
Failed: The disk drive is not operational (has failed). The red Error LED on
the disk drive is on solid.
•
Status: The state of use for the disk drive. Options include:
-
Online: The disk drive is spun up.
-
Standby: The disk drive is idle and is spun down.
-
Offline: The disk drive is failed.
•
Action: There are available action buttons associated with each installed
disk drive:
-
Get Details: View the current, detailed S.M.A.R.T. report for the
disk drive.
4
2