VIETA VH-MI120 User Manual page 23

Daily use
Setting the alarm
1. Make sure the Speaker is powered on before setting the alarm.
2. Press and hold the ALARM button above the Speaker. A alarm clock graph and the
alarm time"12：00" will show on the LCD Display.
3. Rotate the VOLUME CONTROL or VOLUME button to change the time.
4. Press the OK button to confirm the alarm settings.
5. Once the alarm setting has been confirmed, press the ALARM button, or wait for a few
seconds and the Speaker will return to the previous mode.
6. Press the ALARM button briefly to turn the alarm mode on or off.
DON'T FORGET! The alarm will wake you to the sound of the last mode used, wake-up
type is the button of WAKE-TO, there are 3 types: "IPOD","FM","BUZZER", there is the
blinking character representation in the display after selecting.
DON'T FORGET! Press ALARM VOL button to increase/decrease the volume of
alarm, there are 3 grades for selecting indicating in the top right corner of display.
Snooze mode
1. When the alarm sounds, you can press snooze or mute buttons (except the POWER
button) to activate the snooze function.
2. After approximately 10 minutes the alarm will sound again. You can activate the
snooze function again or press the POWER button to cancel the snooze function.
DON'T FORGET! Snooze function will turn off the Speaker. If you want to turn on the
Speaker, press the POWER button to cancel the snooze at first and press POWER again
to turn it on.
Sleep mode
The Speaker can be programmed to switch off after a set time, from increments of 10
minutes, up to 90 minutes.
1. Press the SLEEP button until the required minutes are shown.
Resetting the Speaker
The Speaker can be reset to return to the factory default settings.
Remove the plug from the wall socket.
Aux in
Other audio devices, such as an MP3 player can be connected to the Speaker. There is a
3.5mm cable to connect to the 3.5mm socket which is on the above the Speaker.
1. Press the MODE button repeatedly until " AUX"
2. Adjust the volume to the target level. If the volume level seems low, try to adjust the
volume control of the connected audio device.
03
is shown on the LCD Display.
8