VIETA VH-MI120 User Manual page 22

03 Daily use
Menu Navigation
You can access the menu system of your iPod using the Remote Control.
1.To access the iPod menu system, press the MENU button.
2.Use the UP and DOWN ARROW buttons to highlight the menu options.
3.Use the OK button to select a menu option.
Radio
Turn to a radio station
1.Press the STANDBY button to turn on the Speaker
2.Press the MODE button repeatedly until a radio frequency is shown on the LCD
Display.
3.Press and hold either the FWD or RWD buttons to search for a station.
4.To fine tune a station briefly press either the FWD or RWD buttons.
DON'T FORGET! You may need to reposition the Speaker to get the best reception.
Storing a radio station using the remote control
1.Tune to a radio station as described above.
2.Press the MEM button. "P" and a number will be shown on the LCD Display.
3.Press the UP or DOWN ARROW buttons to select the number you want to store the
radio station against.
4.Press the MEM button again to store the station.
5.Repeat this procedure to store other radio stations.
DON'T FORGET! You can store a maximum of 20 stations.
Moving a stored radio station to a new preset position
1.Tune the radio station as described above.
2.Press the MEM button on the Speaker or the remote control once to show current
preset.
3.Press the UP or DOWN ARROW buttons on the remote control to select the new preset
number.
4.Press the MEM button to store the radio station in the new preset.
DON'T FORGET! This will overwrite any previous stored station on the selected preset
Listening to a stored station
1.Store a radio station as described previously.
2.Press the UP or DOWN ARROW buttons to cycle through the stored stations.
Clock
Setting the clock
When iPod/iPhone is connected to the Speaker, the clock in right of LCD will synchronize
with iPod/iPhone.
7