Advertisement
A
CTIVE
The Most Important Instruction Of All
FILL OUT AND SEND IN THE WARRANTY CARD!
Also, save the invoice or sales slip as proof of purchase.
These actions will protect this investment and help prove
that such a handy piece of audio equipment was really in the
system.
B
Y
EFORE
OU
For the best product performance and the lowest use of
pain-killers, nothing is better than a well-planned profes-
sional system installation. Before you start pulling wires,
sketch out a full layout of the complete system. This will
help plan the wire routing and minimize the "gotchas" later
on. Happy installing.
Mounting The BVD-10 / BVR-10
The small size and low power draw of these units allow
them to be mounted in almost any dry indoor location. Pick
mounting locations close to the units that will be connected
to the BVD-10 or BVR-10. This keeps the unbalanced
audio and video signal cables as short as possible since they
are more susceptible to noise pickup than the balanced Cat-
5 cables. There is no heat build-up problem, so it is okay to
put the BVD-10/BVR-10 in a closed area. Just remember
you need to at least be able to reach the units.
Important Note: When routing the 24 volt AC
power wiring from the wall plug transformer; make
certain that you do not run the power wiring near or
parallel to the signal cables. You may pick up AC hum.
2
-B
ALANCED
B
EGIN
Advertisement
