NEC My Digi User Manual page 82

II. Chinese character input by PinYin
1. Input way in letter state: (entering Pinyin)
Press 1~8 to input Pinyin letters.
Press 'Left or Right navigation key' to move highlight forward/back.
Press ' * ' or lower navigation key to move highlight to down.
CLR delete current letter.
2. Input way in Chinese state: ( select Chinese char)
Press 'Left or Right navigation key' to navigate page up/down.
1~8 to confirm one of them.
'*' confirm the first candidate.
Key 'CLR' or Key 'Up', back to letter state
III. Chinese character by Stroke
1. Input way in stroke state: (entering stroke)
Press 1~8 to input strokes.
Press '*' or Key Down to confirm the current candidate set.
CLR delete current stroke.
Example: Input '一' should press '1' once.
Press ' * ' or lower navigation key to move highlight to down
Reference Information
82