Turbo Set; Memory Status; My Number - NEC My Digi User Manual

My digi
Table of Contents

Advertisement

III. Turbo set
Once user have stored phone numbers in the SIM card or Phonebook, user can easily dial them without needing
to remember the numbers. User can be set default location SIM or Phone for using turbo dial
1. Press [Main]
2. Scroll to [1.Phone book] using upper/lower navigation key, then press [OK]. (or press digit 1 ]
3. Scroll to [3.Turbo Set] using upper/lower navigation key, then press [OK]. (or press digit 3 )
4. Select [SIM] or [Phone]
- For memory location 001~009 : Press and hold the last digit.
- For memory location 010~300 : Press the first /second digit(s) and hold down the last digit.
IV. Memory status
User can check the status of SIM card and phone book memory. If memory full appears, user cannot save any
more numbers until you have deleted an item.
1. Press [Main]
2. Scroll to [1.Phone book] using upper/lower navigation key, then press [OK]. (or press digit 1 )
3. Scroll to [4.Memory status] using upper/lower navigation key, then press [OK]. (or press digit 4 )
V. My number
Phone Numbers assigned to SIM card are saved in My Number if allowed by the card.
Scroll to the desired name or number, and press [OK]
1. Press [Main]
2. Scroll to [1.Phone book] using upper/lower navigation key, then press [OK]. [or press digit 1 ]
Main Menu
Main Menu
27

Advertisement

Table of Contents
loading

Table of Contents