Table of Contents
Advertisement
12-2152.fm Page 20 Wednesday, July 14, 1999 2:48 PM
3. Press and release
so
TRACK ATP
from the display.
Selecting a Stored Station
To select a station you manually
stored in AM, FMI, or FMII, repeatedly
press
to select the desired
BAND
memory group, then press the desired
memory channel button.
Note: Do not hold down the memory
channel button. This stores the cur-
rently tuned station into that location.
Follow these steps to select a station
you automatically stored in automatic
travel programming memory.
1. Repeatedly press
the desired band (
FMI
or
FMII
for FM).
2. Press
TUNE/SEEK TRACK ATP
until
appears on the display.
AS
Note: Do not hold down
. This causes the
SEEK TRACK ATP
stereo to automatically scan and
store the first 6 strong stations it
finds into its automatic travel pro-
gramming memory.
3. Press the desired memory chan-
nel button.
Note: If the stereo could not find
any strong stations,
the channel number appear on
the display if you try to tune to an
automatic
travel
memory channel.
20
Scanning Stored Stations
TUNE/SEEK
AS
disappears
The radio can scan all stored stations
in the selected band, pausing for 5
seconds at each station.
To start scanning stored stations,
repeatedly press
desired memory group, then press
P-SCAN
To scan the stations in the automatic
travel programming memory, press
BAND
press
appears on the display, then press
SCAN
to select
BAND
AM
for AM, or
As the radio scans each memory
TUNE/
channel, the channel number flashes
and the frequency is displayed. After
scanning all memory channels, the
stereo returns to the original station.
To stop the scanning when the radio
pauses at a station you want to listen
to, press
and
- - -
programming
BAND
.
to select the desired band,
TUNE/SEEK TRACK ATP
.
(illus - call out P-SCAN button)
again.
P-SCAN
to select the
so
AS
P-
Advertisement
Table of Contents
