Special Features; Quickly Selecting Tracks; Searching For A Section Of A Track; Assigning Cds To A Custom Cd Group - Optimus CD-8400 Owner's Manual

Special Features

Quickly Selecting Tracks

Searching for a Section
of a Track
Assigning CDs to a
Custom CD Group
Note: To change the CDs assigned to
a custom CD group, you must clear all
the entries and enter the desired CDs
again.
When the CD changer is stopped or paused, press
or on the remote control) until the CD changer displays the desired track's
number. Or, enter the track number using the remote control's number buttons,
then press TRACK SET within 5 seconds.
If you use this feature while a CD plays, the CD changer stops playing the cur-
rent track and skips to the next or previous track.
To rapidly search forward or backward for a track section while a CD plays, hold
down or
The display shows the elapsed time to help you locate the desired section, and
the CD plays at a lower volume and higher speed than normal. Release the but-
ton to resume normal play.
You can also search a track when a CD is paused. The searching speed is
faster, the display shows only the minutes, and you do not hear the CD play.
Note: You cannot search past the end (
beginning of a CD.
You can assign any loaded CD into a custom CD group. This lets you group
your favorite CDs together for more convenient playback.
Follow these steps to assign CDs to a group.
1. While the CD changer is stopped, repeatedly press
and the number of the desired group light. (If any discs have been
assigned to the group, the lowest disc number appears on the display.
Press to clear the group.)
CLEAR
2. Select a CD for storing into the group.
• If you use
DISC NUMBER
disc number is automatically stored in memory.
• If you use the remote control's number buttons, press
store the disc number in memory.
3. Repeat Step 2 to store all the CDs you want.
Notes:
• The custom group memory is kept even after you turn off the CD changer.
• The changer keeps the CDs stored in custom group memory for up to 2
days in the event of a power loss.
Checking the Custom Group Contents
With the CD changer stopped, repeatedly press
number of the desired group light. Then repeatedly press
custom group number appear on the display. Then repeatedly press
. The programmed disc numbers appear in order as you press
NUMBER
.
NUMBER
on the front panel ( or
End appears on the display) or the
, simply wait until the display blinks. The
MODE
or (or
on the remote control).
until CUSTOM
MODE
to
DISC SET
so CUSTOM and the
so and the
TIME C
DISC
DISC
11