JBL L226W Owner's Manual

Studio series
Hide thumbs

Advertisement

Quick Links

STUDIO
SERIES
L226W, L226C, L228C,
LS326W, LS326C, LS328C
OWNER'S GUIDE

Advertisement

loading

  Related Manuals for JBL L226W

  Summary of Contents for JBL L226W

  • Page 1 STUDIO ™ SERIES L226W, L226C, L228C, LS326W, LS326C, LS328C OWNER’S GUIDE...
  • Page 2: Unpacking The Speakers

    THANK YOU FOR CHOOSING JBL, INC. JBL Subwoofer Left Right (optional) For more than 60 years, JBL, Inc. has been involved in every aspect of music Front Front Channel Channel and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
  • Page 3: Speaker Connections

    PLACEMENT SPEAKER CONNECTIONS STEREO CONNECTION TIPS Before deciding where to place your speakers, survey your room and think about placement, keeping the following points in mind, and using Figure 1, on previous page, as a guide: • For best results, place the speakers 6'–8' apart. •...
  • Page 4: Existing Construction

    EXISTING CONSTRUCTION L226C, L228C, LS326C, LS328C ≥1/2" ≥1/2" ≥1/2" 3. NOTE: Always allow at least a 1. Remove the plastic paint shield 2. Determine the correct speaker 4. Ensure that the drywall or from the speaker frame. 1/2" between a wall stud and the plywood board or other appro- location.
  • Page 5 L226W, LS326W ≥1/2" ≥1/2" ≥1/2" 3. NOTE: Always allow at least a 4. Ensure that the drywall or 1. Remove the plastic paint shield 2. Determine the correct speaker 1/2" between a wall stud and the plywood board or other appro- from the speaker frame.
  • Page 6: New Construction

    NEW CONSTRUCTION If you wish to preinstall a rough-in frame before the drywall is installed, you will need to purchase the correct rough-in-frame kit for your model: Speaker Model Rough-In-Frame Kit L226W, LS326W RIF 6 L226C, LS326C RIF 6CS L228C, LS328C RIF 8C Detailed installation instructions are supplied with the rough-in kit.
  • Page 7: Specifications

    SPECIFICATIONS Studio L L226W L226C L228C Frequency Range (–6dB) 30Hz – 20kHz 30Hz – 20kHz 28Hz – 20kHz Recommended 10 – 125 Watts 10 – 125 Watts 10 – 135 Watts Amplifier Power Range Sensitivity 89dB 89dB 90dB (2.83V @ 1 meter)
  • Page 8 Declaration of Conformity We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du Loir France declare in own responsibility that the products described in this owner’s manual are in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Laurent Rault Harman Consumer Group, Inc.

This manual is also suitable for:

L226cL228cLs326wLs326cLs328cStudio l226w ... Show all