Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42221-01
20120604
©2012 Hunter Fan Co.
Model 59009
Model 59009
Model 59009
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 59009
Summary of Contents for Hunter 59009
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42221-01 20120604 ©2012 Hunter Fan Co.
-
Page 2: Table Of Contents
7 • Completing Your Installation With a use a solid-state speed control with this fan. Use only Hunter speed Bowl Light Fixture ....12 controls. - Page 3 If you want to use an existing fan site, complete the following checklist to determine Fan Support if the site is acceptable and safe for your new Hunter fan. If you cannot check off System every item, prepare a new fan site as described on this page.
- Page 4 Section 2 • Installing the electrical codes and ANSI/NFPA 70. If Ceiling Plate. you are unfamiliar with wiring, use a qualified electrician. 42221-01 • 06/04/12 • Hunter Fan Company...
- Page 5 Style wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Low Profile Mounting fits close to the...
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
2-6 Pass the screws through the slotted holes in the ceiling plate into the pilot holes you drilled. 2-7 Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Wood Screw 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 8: Assembling And Hanging The Fan
3-7. Place the slots over the hooks to hang the fan. Trim Ring Grounding Step 3-4 Screw Ceiling Plate Hook Grounding Screw Step 3-4 Steps 3-6 – 3-7 Top Housing Screw 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 9: Qualified Electrician
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 10: Installing The Canopy
Note: Should you need to remove the trim ring, press firmly on opposite sides of the trim ring. The tabs will flex out releasing the canopy trim ring. Step 5-3 Canopy Screw Step 5-4 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 11: Assembling The Blades
Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades. Blade Iron Armature Screw Step 6-2 Blade Armature Screw 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 12: Completing Your Installation With A Bowl Light Fixture
7-8. Turn the housing counterclockwise until the standoff screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all four screws firmly. Steps 7-6 – 7-8 42221-01 • 06/04/12 • Hunter Fan Company... -
Page 13: Fan
7-14. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs. Connector Step 7-9 Pull Chain Light Pendant Globe Step 7-10 Steps 7-12 – 7-14 Step 7-11 42221-01 • 06/04/12 • Hunter Fan Company... - Page 14 8-4. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt.
-
Page 15: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42221-01 • 06/04/12 • Hunter Fan Company...
Need help?
Do you have a question about the 59009 and is the answer not in the manual?
Questions and answers