Icom iF4032S Instruction Manual page 4

PRECAUTIONS
(Continued)
BE CAREFUL!
The IC-F3032S and IC-F4032S meet
IP67* requirements for dust-tight and waterproof protection.
However, once the transceiver has been dropped, dust-tight
and waterproof protection cannot be guaranteed because of
possible damage to the transceiver's case or the waterproof
seal.
* Only when the jack cover or the optional HM-168LWP is
attached.
Even when the transceiver power is OFF, a slight current still
flows in the circuits. Remove the battery pack or batteries
from the trans ceiver when not using it for a long time. Other-
wise, the installed battery pack or batteries will become ex-
hausted, and will need to be recharged or replaced.
MAKE SURE
to turn the transceiver power OFF before
connect ing the supplied/optional equipment.
iii