Draytek Vigor2800 Series User Manual page 50

Filter Rule
Active
Comment
Next Filter Set
To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page.
Comments
Check to enable the
Filter Rule
Pass or Block
44
Click a button numbered (1 ~ 7) to edit the filter rule. Click the button
will open Edit Filter Rule web page. For the detailed information,
refer to the following page.
Enable or disable the filter rule.
Enter filter set comments/description. Maximum length is
23–character long
Set the link to the next filter set to be executed after the current filter
run. Do not make a loop with many filter sets.
Enter filter set comments/description. Maximum length is 14-
character long.
Check this box to enable the filter rule.
Specifies the action to be taken when packets match the rule.
Block Immediately - Packets matching the rule will be dropped
immediately.
Pass Immediately - Packets matching the rule will be passed
immediately.
Vigor2800 Series User's Guide