Kirkland Signature Remote Control 2 User Manual page 2

Welcome
Congratulations on your Remote Control 2 purchase.
Remote Control 2 will allow you to operate your wireless hear-
ing instruments. It is both an elegant and user-friendly remote
control as well as a status reader which gives you access to
wireless functions on your hearing instruments.
The Remote Control 2 can be used to adjust both of your hear-
ing instruments simultaneously. Or you can control both hearing
instruments individually, allowing you to perfectly fine-tune your
hearing instruments to any specific hearing situation.
Please read this manual carefully to fully benefit from the
Remote Control 2. Ask your hearing healthcare professional if
you have any questions.
For your safety, carefully read the chapter Important Informa-
tion, on pages 31-35
FCC ID: X26RC-2
2
Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communica-
tions.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
3