Management" Menu - HP sb21 Owner's Manual

"Management" Menu

To open the "Management" menu:
1. Press the "Menu" button to open the On Screen Display (OSD) menus.
2. Use the or buttons to open the "Management" menu tab.
3. Press the buttons to select one of the following items:
Menu Location
Choose the Menu location on the display screen.
Projection Direction
• Front-Desktop: The image used in standard desktop operation.
• Rear-Desktop: The image is reversed for projection from behind
• Front-Ceiling: The image is turned upside down for ceiling-
• Rear-Ceiling: The image is reversed and turned upside down
Signal Type
Select the desired signal type - RGB, YCrCb and YPrPb sources.
Lamp Hour
Displays the lamp's elapsed operating time (in hours).
Reset Lamp Hours
Reset the lamp setting only when the lamp is replaced.
Reset this Menu
Choose "Yes" to return the display parameters (except for Lamp Hours) on
this menu to their factory default settings.
Machine Reset
Choose "Yes" to return the display parameters (except for Lamp Hours) on
ALL menus to their factory default settings.
a translucent screen.
mounted projection.
for ceiling-mounted projection from behind a
translucent screen.
user
controls
xb31 sb21
NOTE: The hp sb21's OSD
does not include an
Audio menu.
26