Table of Contents
Advertisement
07 Driver support
Park Assist Pilot (PAP)* - function
The combined instrument panel uses sym-
bols, graphics and text when elements are to
be executed.
NOTE
The PAP function measures the space and
turns the steering wheel - the driver's task
is to follow the combined instrument pan-
el's instructions and select the gear
(reverse/forward), control the speed, brake
and stop.
PAP can be activated if the following criteria
are met once the engine has been started:
•
30
The functions ABS
intervene during an ongoing PAP function
- these can be activated in the event of
e.g. steep and slippery surfaces, see the
sections on Foot brake (p. 288) and Sta-
bility system ESC (p. 183) for more infor-
mation.
•
Trailers must not be connected to the car.
•
The speed must be below 50 km/h.
07
30
(Anti-lock Braking System) - Anti-lock braking system.
(Electronic Stability Control) - Stability system.
31
*
250
Option/accessory, for more information, see Introduction.
Principle for PAP.
The PAP function parks the car using the fol-
lowing steps:
31
or ESC
must not
1. The function searches for a parking space
and measures it (A & B (p. 250)). During
measurement, speed must not
exceed 30 km/h.
2. The car is steered into the space while
reversing (C & D (p. 251)).
3. The car is straightened up in the space by
driving forward and back (E & F (p. 251)).
Related information
•
Park Assist Pilot (PAP)* (p. 249)
•
Park assist camera (p. 245)
Park Assist Pilot (PAP)* - operation
The driver is instructed about how PAP works
by means of simple, clear instructions in the
combined instrument panel - using both
graphics and text graphics and text message
(p. 253).
NOTE
Remember that certain steering wheel
positions may obstruct the combined
instrument panel's instructions when you
turn it during the parking manoeuvre.
1 - Searching and checking
measurements
The PAP function searches for a parking
space and checks whether it is big enough.
Proceed as follows:
Advertisement
Table of Contents
