Broadsoft Phonebook - Yealink SIP-T38G User Manual

To place a call f rom the corporate directory:
1. Press Directory->Remote Phone Book.
2. Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3. Select the desired contact in the corporate directory.
4. Press the Dial soft key.
In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To e nable the presentation of caller identity stored in the remote phonebook:
1. Click on P hone->Features.
2. Click the "+" sign on the left of the G e neral Information to expand the feature list.
3. Select Enabled from the pull-down list of Match Remote Phone Book.
4. Enter the refresh period of corporate directory in the Load Remote Phone Book
Interval ( 1 20~2592000s) field. The default value is 3600 seconds.
5. Click Conf irm to accept the change.
You can access the BroadSoft directory through your phone. You can add local contacts
from the BroadSoft directory. You can also dial a contact from the BroadSoft directory.
You can configure your new phone to access up to 6 BroadSoft directories. Contact your
system administrator for the access URL of the BroadSoft directory.
To configure the BroadSoft phonebook via phone user interface:
1. Press Me nu->Features->BroadSoft Settings Menu->Broad Soft Dir Settings.
2. Press or , or the Switch soft key to select the desired BroadSoft item from
the BroadSoft Item field.
3. Enter the parameters: display name, server address, port, user name and
password in the corresponding fields.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Customizing Your Phone
41