Sharp AR-NB3 Options Manual page 7

(3) Scanner settings
Key name
Color mode key Color mode
Format key Format & compression type
Multi file/ Single file
Resolution key Resolution
Duplex key Single document/
Duplex document
Vertical bind document (Vertical set)
Horizontal bind document (Vertical set)
Vertical bind document (Horizontal set)
Horizontal bind document (Horizontal set)
Document size Scan size
key
(3)-1. Color mode selection
When [Color Mode] key the machine is pressed, the following window is
displayed.
(4) Send file (message and filename)
• Information contained in filename
Sender name : Use MFP product name.
Date & Time : Date and time at which file is sent
Session page : Image send counter
counter
Unique identifier : Automatically created based on the information
of the date and time and image send counter.
Example: AR-M350_20000620_155114_0057_06a3f3393948.pdf
• Mail subject
Can be freely set.
Default: Scanned image. device name: AR-XXX (MFP product name)
Example: Scanned image. device name: AR-XXX
Classification
* Color
Gray
B/W
TIFF
TIFF G3
* PDF
PDF G3
PDF G4
JPEG
Single 1 page 3 1 file
* Multi all pages 3 1 file
Multi 2 pages
Multi 3 pages
Multi 4 pages
Multi 5 pages
Multi 6 pages
75dpi
100dpi
* 150dpi
200dpi
300dpi
400dpi
600dpi
* 1-SIDED
2-SIDED
Vertical bind document (Vertical set)
Horizontal bind document (Vertical set)
Vertical bind document (Horizontal set)
Horizontal bind document (Horizontal set)
A3 / B4 / A4 / A4R / B5 / B5R / A5 / A5R
11 x 17 / 8 a x 14 / 8 a x 11 /
8 a x 11R / 5 a x 8 a / 5 a x 8 a R
Display item
3 1 file
3 1 file
3 1 file
3 1 file
3 1 file
• Mail message
The following messages are added to the image send mail.
Device name:
Model:
Location:
File type:
Resolution:
Example;
Device name :AR-XXX
Model name :AR-XXX
Location :D2) Planning dept.
File type :PDF MMR (G4)
Resolution :200 dpi x 200 dpi
AR-NB3 SPECIFICATIONS
1 – 5
Remark
The scan color is set.
* Default is COLOR.
The file format is specified.
* Default is PDF.
Single : 1 page is made into 1 file.
Multi : 2 or more pages are made into 1
file.
* Default is "Multi all pages a 1 file."
The output resolution is set.
* Default: 150dpi
Setting of single or duplex.
Duplex setting is displayed only when the
RSPF is installed.
When "Duplex" is set, the document is
scanned only from the RSPF.
* Default is "Single."
Selection of the following four
(only when "Duplex document" is set.)
• Vertical bind document (Vertical set)
• Horizontal bind document (Vertical set)
• Vertical bind document (Horizontal set)
• Horizontal bind document (Horizontal
set)
Setting of the scan size.
The scan size is set with the document size
detection, and can be manually changed.
When the document size cannot be detected
or when there is no size input, sending can-
not be made. The display is made sequen-
tially from the largest to the smallest, from the
top to the bottom, each in the AB series and
the inch series.
Freely set
MFP product name
Freely set
File type of send image
Resolution of send image