Casio 5302 Operation Manual

© 2012 CASIO COMPUTER CO., LTD.
MO1302-EB
Congratulations upon your selection of this CASIO watch.
Applications
This watch has built-in sensors that measure direction and temperature.
Measurement results are indicated by the watch's hands and displays. These features make this watch
useful when hiking, mountain climbing, or when engaging in other such outdoor activities.
• The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
• When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E
About This Manual
• Depending on the model of your watch, display text appears either as
dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
• Button operations are indicated using the letters shown in the
illustration.
• Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-2
Contents
E-2 About This Manual
E-3 Things to check before using the watch
E-7

Mode Reference Guide

E-12 Timekeeping
E-13 Confi guring Home City Settings
E-13 To confi gure Home City settings
E-14 To change the daylight saving time (summer time) setting
E-15 Confi guring Current Time and Date Settings
E-15 To change the current time and date settings
E-18 Hand Home Position Adjustment
E-18 To adjust home positions
E-20 Using the Digital Compass
E-20 To perform a digital compass operation
E-23 To perform bidirectional calibration
E-25 To perform magnetic declination correction
E-26 To store a direction angle reading in Bearing Memory
E-29 To set a map and fi nd your current location
E-30 To fi nd the bearing to an objective
E-31 To determine the direction angle to an objective on a map and head in that direction
(Bearing Memory)
E-4
E-45 Using the Alarm
E-45 To enter the Alarm Mode
E-46 To set an alarm time
E-46 To test the alarm
E-47 To turn an alarm and the Hourly Time Signal on and off
E-47 To stop the alarm
E-48 Illumination
E-48 To illuminate the display manually
E-48 To change the illumination duration
E-50 To enable or disable the auto light switch
E-52 Button Operation Tone
E-52 To enable or disable the button operation tone
E-53 Troubleshooting
E-57 Specifi cations
E-6
Operation Guide 5302
Warning!
Warning!
Never view directly with optical instruments.
This label is a warning and caution label for Class 1M UV LED products that comply with
IEC60825-1:1993+A1:1997.
Although Class 1M UV LED light is invisible, never view directly with optical instruments.
The UV LED has a maximum output of less than 25nW and a wavelength of 375nm.
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under "To confi gure Home City settings" (page E-13) to confi gure your Home City and
daylight saving time settings.
Important!
Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping
Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See "Confi guring Current Time and Date Settings" (page E-15).
The watch is now ready for use.
E-34 Taking Temperature Readings
E-34 To enter and exit the Thermometer Mode
E-34 To take temperature readings
E-36 To calibrate the temperature sensor
E-37 Specifying Temperature Unit
E-37 To specify the temperature unit
E-38 Checking the Current Time in a Different Time Zone
E-38 To enter the World Time Mode
E-38 To view the time in another time zone
E-39 To specify standard time or daylight saving time (DST) for a city
E-40 To swap your Home Time and World Time Cities
E-41 Using the Stopwatch
E-41 To enter the Stopwatch Mode
E-41 To perform an elapsed time operation
E-41 To pause at a split time
E-42 To measure two fi nishes
E-43 Using the Countdown Timer
E-43 To enter the Countdown Timer Mode
E-43 To specify the countdown start time
E-44 To perform a countdown timer operation
E-44 To stop the alarm
Mode Reference Guide
Your watch has 7 "modes". The mode you should select depends on what you want to do.
To do this:
• View the current date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure time and date settings
• Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Determine the temperature at your current location
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode
Use the stopwatch to measure elapsed time
Use the countdown timer
Set an alarm time
UV LED
LED RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
Enter this mode:
Timekeeping Mode
Digital Compass Mode
Thermometer Mode
Stopwatch Mode
Countdown Timer Mode
Alarm Mode
ENGLISH
E-1
E-3
E-5
See:
E-12
E-20
E-34
E-38
E-41
E-43
E-45
E-7