Simple Audio Roomplayer I User Manual page 10

Set up your first Roomplayer
Step 2 Connect to your network.
You can locate your Roomplayer anywhere in your home,
but where you place it will influence how you connect to
Option A
your network. Choose
Option B
to your router. Choose
close to your router. Do not apply power until you have
completed step 2.
Where is the on/off switch?
There isn't an on/off switch on your Roomplayer. Your
Roomplayer will start up as soon as you apply mains power.
MAINS IN
SAFETY INFORMATION OPT OUT
if your Roomplayer is close
if your Roomplayer is not
6
DIG
OUT
L
AUDIO OUT SUB AUDIO IN
2
Option A Connect using an Ethernet cable.
Connect the Roomplayer to your router using the Ethernet
cable provided. Now attach the mains lead to your
Roomplayer and plug it into a wall socket. You can now apply
power. The green activity LED on the rear of your Roomplayer
will flicker indicating a network connection has been made.
The front red status LED will go out.
No free sockets on your router?
If so, consult your computer supplier or Simple Audio
retailer. You may need to install a network switch.
Can I use power strips?
We recommend that you do not connect to power strips or
filtered sockets because it may affect the performance of
your system
10