Page 1
® ABLELink SE5001 Ethernet Serial Server User’s Manual Version 1.5 Updated on 2009/07/30 Tel: 886-3-5508137 Fax: 886-3-5508131 http://www.atop.com.tw...
SE5001 Ethernet Serial Server Important Announcement The information contained in this document is the property of Atop Technologies, Inc. and is supplied for the sole purpose of the operation and maintenance of products of Atop Technologies, Inc. No part of this...
Page 5
4.1.5 Uninstalling......................32 ....................32 4.2 Virtual COM Communication 4.2.1 Enable Virtual COM on SE5001................32 4.2.2 Run Serial/IP for Atop on PC................34 4.3 Configuring Virtual COM Ports ..................34 5. SNMP Setup....................36 5.1 SNMP Network Management Platform................36 5.2 Using NetworkView as an Example................
1.1 Packaging Please check ones package contains the following items: Atop SE5001-S2 or SE5001-S5 Ethernet Serial Server x 1 5 pins Terminal Block for Serial Connector x 1 (only for SE5001-S5is) 3 pins Terminal Block for Power Connector x 1 (only for SE5001-S5is)
3. Click the Add/Remove button to remove the program, or From Windows Start menu select Programs, Serial IP for ATOP, Uninstall Serial IP for ATOP to remove the program. 4.2 Virtual COM Communication 4.2.1 Enable Virtual COM on SE5001 From web browser access to SE5001 by typing its IP address, click on COM1 link to access COM1 page, on the top half of the page click on “TCP Server”...
4.2.2 Run Serial/IP for Atop on PC In the Window Start Menu, go to “Programs”, select “Serial/IP for ATOP” and select “Control Panel”. When “Select Port” windows pop-up, please select the serial port one want to configure. Then the configuration window will appear.
SerialManager D.1. SerialManager Introduction SerialManager, developed by ATOP, is a special tool for device management and configuration, and can realize the daily management on various ATOP network devices for address search, device positioning, parameter configuring, firmware downloading and so on.
Page 61
The user can modify the IP address of any selected device, shown as the figure below: D3.4.2 COM Port … ATOP has developed various network products, and some of the ATOP devices are specially supplied to some serial-port servers, while this function is applied to the configuration of COM port parameters.