Page 1
® ABLELink SE5002 Ethernet Serial Server User’s Manual Version 1.3 Updated on 2008/02/29 Tel: 886-3-5508137 Fax: 886-3-5508131 http://www.atop.com.tw...
Ethernet Serial Server SE5002 Important Announcement The information contained in this document is the property of Atop Technologies, Inc. and is supplied for the sole purpose of the operation and maintenance of products of Atop Technologies, Inc. No part of this...
It is essential that only the supplied power cord can be used. Use only shielded cables to connect the device’s ’ RS-232 or RS-485 port. Be cautioned that changes or modifications not explicitly approved by ATOP Technologies could void your authority to operate the equipment.
RS-422 are limited in their transmission distance of 15 m. Examples of these devices are PLC controllers, card readers, display signs, security controls, CNC controller, etc. ATOP Technologies has overcome the limit with a family of SE 5002 Series Ethernet Serial Servers. The SE 5002 sever family is...
Select Serial IP in the list of installed software. Click the Add/Remove button to remove the program, or From Windows Start menu select Programs, Serial IP for ATOP, Uninstall Serial IP to remove the program. 4.2 Virtual COM communications 4.2.1 Enabling Virtual COM on SE5002 From the web browser, access SE5002 by typing its IP address.
Fig. 37. Enabling Virtual COM port via Telnet 4.2.2 Running Serial/IP on PC On Window Start Menu, go to \program\serial/IP for ATOP\control panel\Select Port\, then select the serial port. Then the “ Serial I/P for Atop Control Panel” window appears (Fig. 38).
Appendix D: Using SerialManager D.1. SerialManager Introduction SerialManager, developed by ATOP, is a special tool for device management and configuration, and can realize the daily management on various ATOP network devices for address search, device positioning, parameter configuring, firmware downloading and so on.
Page 54
The user can modify the IP address of any selected device, shown as the figure below: D3.4.2 COM Port … ATOP has developed various network products, and some of the ATOP devices are specially supplied to some serial-port servers, while this function is applied to the configuration of COM port parameters.