Initial Setup & Programming - Reconyx RapidFire Instruction Manual

Initial Setup & Programming
With the CF card inserted in the camera, turn your camera on using the
On/Off switch. If this is the first time you've used your camera, it will
automatically display the Date/Time setup change option, beginning with
Enter Year.
Press the << and >> buttons to set the date (year, month, and day) and time
(hour and minute); press the OK button after each part of the date and time
are correct.
Your RECONYX RapidFire camera comes pre-programmed with factory
TM
default settings. By default the SM70 camera runs in license plate capture
mode, taking 3 pictures per trigger in RapidFire mode with no delay between
triggers and exposure settings optimized for license plate capture. The
SC95 defaults to 3 pictures per trigger with a 1 second pause between
pictures and no delay between triggers.
If you wish to change your camera's settings you can do so easily in the
field. Changes are made using the control buttons and display that are
located under the Removable Cover. Once you make selections, they are
retained by the camera – even when the camera is off and the batteries are
removed – so that you don't need to make selections again unless you want
to change something. If you want to schedule when your security camera is
on and off, you do this using the Scheduling Software included on your CD.