Working with the notebook
► Position the notebook so that it is in line with the back edge and positioning
aid of the Port Replicator (1).
► Push the notebook onto the Port Replicator in the direction of the arrow (2) until it engages.
Connecting the mains adapter to the Port Replicator
1
2
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
52
2
3
► Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the
mains adapter (2).
► Plug the power cable into the mains
socket (3).
Fujitsu Technology Solutions
1