Owner's, Operator's and
Maintenance Manual
for the Series 107
Powered Wheelchair
Mechanical Troubleshooting
Power wheelchair veers left or right
Power wheelchair has sluggish turn
performance
Front casters flutter
Body postion Troubleshooting
All other control components are under batteries, in the event of a power failure of motor
check to make sure connections are tight. The ISM controls the actuators for positioning if
your chair is not equipped with a 3-switch system. If the chair will not stand or positioning
systems fail try a re-set by disconnecting the main power several times at the circuit
breaker. If the component is defective and the chair will not stand to access the ISM
remove the seat pan to access.
2 March 2010
Check for correct and equal tire
pressure
Check for loose front stem nuts/bolts
Check for correct and equal tire
pressure
Check for loose front stem nuts/bolts
adjust turn acceleration.
Check for correct and equal tire
pressure
Check for loose front stem nuts/bolts
28
Page of 35
28