Powering On The Reader - baiMobile 3000MP User Manual

Powering on the Reader

The baiMobile 3000MP Reader does not have an On/Off switch or button. Your reader is
powered on by inserting your smart card into your reader. If your smart card is already
inserted in your reader, slide it out and then reinsert the card. You will notice the reader's
Home Screen displayed on the LED panel on the back of the reader.
Power On Screen 1 – displayed for about 1.7 seconds when reader is first powered on
Power On Screen 2 – displayed for about 1.7 seconds
Power On Screen 3 – Reader will accept a Bluetooth connection request from an
application on your Android device without requiring the user to press the OK button for 5
minutes
10