Advertisement
With your MD1023 metal detector, you can hunt for coins, relics, jewelry,
gold, and silver just about anywhere. The detector is versatile and easy to
use. This unit has an auto ground balance used in Disc and All Metal
Modes.
FEATURES:
View Meter- Quite useful in a noisy area, where it is difficult to hear
or distinguish tones.
Headphone Jack (Headphones not included)-Connect stereo
headphones and operate without trouble.
Waterproof Searchcoil- Use the detector under shallow water.
Adjustable Stem- Adjust the detector's length for comfortable use.
Arm Support- Carry and operate your detector comfortably.
Power-Your metal detector requires two 9-volt alkaline batteries (not
supplied). The built in insolating circuit helps avoid wrong battery
connection and prolong the battery life.
ASSEMBLING THE DETECTOR
Assembling your detector is easy and requires no special tools. Just
follow these steps:
1. Insert the latch on the liner into the assembly hole on the bottom of the
control box. Then slightly push the control box in the direction of IN on
the handle to fix the latch in place. Tighten the fixing screw properly.
Hide quick links:
Advertisement
