1. Manuals
  2. Brands
  3. 360 Vision Manuals
  4. DVR
  5. H7016
  6. User manual

360 Vision H7016 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

H7016
User Manual

Advertisement

Table of Contents
loading

Related Manuals for 360 Vision H7016

Summary of Contents for 360 Vision H7016

  • Page 1 H7016 User Manual...
  • Page 2 Preface Preface We sincerely appreciate your choice to purchase H7016 product. H 7016 Security operates on the principle that our customers deserve strong, reliable security products with an emphasis on value. This is the user and installation guide for the H7016 embedded DVR.
  • Page 3 H7016 User Manual H7016 User Manual This is an operating manual for use with the H7016 product. Caution We strongly recommend that users read all safety cautions carefully before operating the product, and operate the product appropriately. Since the indicated cautions contain critical safety information, they must be fully complied with.
  • Page 4 Caution Non-compliance may result in death or serious injury. These messages contain the highest degree of importance. Danger Please connect the power cord only to the Do not expose the product to moisture type of AC outlet indicated in the manual and dampness.
  • Page 5 H7016 User Manual In case of lightning, immediately turn off Do not modify the product in any way. Doing so may lead to fire and electric the power switch and remove the power cord from the power outlet. Failure to do so shock.
  • Page 6 Caution Non-compliance may result in a serious or lesser degree of injury. It may also cause damage to the product or to property. Warning Do not leave the power cord or other Avoid contact with water or beverages. cables in passageways or walkways. Contact with water or beverages may Passers-by may trip and fall.
  • Page 7 H7016 User Manual Non-compliance may result in minor injury or damage . Caution If a foreign substance is stuck to the place credit cards/telephone product, remove it using a soft cloth or cards/bank account books/tickets 본 제품에 이물질이 묻었을 경우에는 부...
  • Page 8 Caution Denotes requirements and limitations in operation. Users are recommended to read the relevant details carefully so as to operate Important the product properly and without harm. The product may not work properly if the The product is designed to be proof power source is unstable or/and if electric against electric power failures;...

  • Page 9: Table Of Contents

    Copyright / Certifications / Registered Trademark / Terms of Use ........i H7016 User Manual ......................ii Caution ..........................ii Table of contents ......................viii Chapter 1 Introduction and Installation of H7016 ............1-1 1. About H7016 ..................1-3 2. H7016 specification ................1-4 3. System Diagram ..................1-5 4.
  • Page 10 (6) Jump to Last saved data ............... 3-16 (7) DST (Daylight Saving Time) ............3-17 (8) System log ..................3-18 Chapter 4 H7016 SETUP ....................4-1 1. Setup Menu .................... 4-3 (1) About Setup ..................4-3 2. System Setup ..................4-4 (1) System configuration ..............

  • Page 11: H7016 User Manual

    H7016 User Manual 6. Information ..................4-33 (1) System Log ................... 4-33 (2) System status ................4-34 (3) Version ..................4-38 7. Quick Setup ..................4-39 8. Backup ....................4-41 (1) Backup ..................4-41 (2) Auto USB backup ................ 4-43 (3) Backupviewer ................
  • Page 12 Introduction of the product features and components H7016 INTRODUCTION...
  • Page 13 H7016 User Manual...

  • Page 14: About H7016

    Chapter 1. Introduction 1. ABOUT H7016 H7016 is Digital Video recorder which uses the leading codec compression (H.264) for its image storage and networking. Main Features H.264 codec compression. PIP(picture in picture) mode Multi-User level access and control system. Professionalized menu functions and configuration.

  • Page 15: H7016 Specification

    H7016 User Manual 2. H7016 SPECIFICATION Description H7016  16 CH Composite Inputs  VGA Monitor (NTSC/PAL)  CCTV (VGA) Monitor  1 Spot CCTV Monitor (NTSC/PAL) Outputs  16CH Loop Composite Videos  1/4/9/16 Split & PIP Screen split ...

  • Page 16: System Diagram

    Chapter 1. Introduction 3. SYSTEM DIAGRAM H can be connected with the following devices. For more detail on the connection, see each chapter’s explanation in the manual.

  • Page 17: Components

    H7016 User Manual 4. COMPONENTS Following components are included in the box with H7016 ○ ………………………… H7016 main unit ○ ………………………… DC ADAPTER ○ ………………………… H (CD) ○ ………………………… ………………………… ○ User’s manual ○ ………………………… Loopback Cable (optional) ○ …………………………...

  • Page 18: Chapter 2 Start H7016

    Read this chapter before installation. It contains mandatory items you should know START H7016...
  • Page 19 H7016 User Manual...

  • Page 20: Front Design

    Chapter 2. Start H7016 1. H7016 OUTLOOK (1) Front design The below image shows the front case and indicates each part of the case. 1. Channel Number buttons Use these buttons to select a channel or enter a number in the setup menu •...
  • Page 21 H7016 User Manual 3. Power button / USB 2.0 port Power button: Turn on/off the DVR unit. USB 2.0 port: • Connect mouse to control DVR unit • Can be used to perform a Firmware upgrade • Make a backup of recorded data 4.
  • Page 22 Chapter 2. Start H7016 4 split display mode sequences in 4 channel groups as shown below. 9 split display mode sequences in 9 channel splits as shown below. PIP (Picture in Picture) mode sequences a single channel within a single screen.
  • Page 23 H7016 User Manual Press this button to execute the instant recording function Press this button to enter PTZ mode, ZOOM and Focus buttons only work when the DVR is set in PTZ mode. Press this button to enter the setup mode...
  • Page 24 Chapter 2. Start H7016 Press once : 1 frame Rev.Playback. Press once : 1 frame Playback Press twice: to Jump 30min in the Press Twice: to jump 30min in the rev. playback direction. playback direction. 6. Status display (LED) •...
  • Page 25 H7016 User Manual This LED turns on when the system receives a signal from the remote controller 7. Search buttons The below buttons are used in the search mode and live mode. FASTFOWARD REWIND In Search mode In Search mode...
  • Page 26 Chapter 2. Start H7016 8. Other Search Tools The Jog shuttle Dial is another convenient way to search images • Jog: inner circle dial Clockwise movement: Move forward from the current search position frame by frame. Counter-Clockwise movement: Move backward from the current search position frame by frame.

  • Page 27: Rear Panel And Connection Locations

    H7016 User Manual (2) REAR PANEL AND CONNECTION LOCATIONS H7016 ① Power supply connector Connect the power supply to the DVR unit. ② Video Input Connect camera co-axial cable output to the BNC connector Channels locate in the order 1 to 8 from left to right.
  • Page 28 Chapter 2. Start H7016 ⑦ Audio In/Out Connect up to 4channels of audio for recording and playback. To record sound, connect microphone on input connector and to listen a speaker on the output port, ⑧ RS232 Connector Use to connect with external devices such as POS and Keyboard controller ⑨...

  • Page 29: Remote Controller

    H7016 User Manual (3) REMOTE CONTROLLER Live Display mode PLAY/PAUSE ID: Set Controller ID POWER SEARCH BACKUP Switch to LIVE SETUP ROTATE : Auto rotate in Navigation Key : Move menu in normal mode, single display mode PTZ control in PTZ mode...
  • Page 30 Chapter 2. Start H7016 Playback PLAY/PAUSE FF : Fast forward playback FR : Reverse playback LIVE : Switch to live mode Navigation key to move menu, ENTER : Enter to select EXIT 3 : Enter 3 to display channel 3...

  • Page 31: How To Install

    H7016 User Manual 2. HOW TO INSTALL. (1) INSTALLATION To install H, you must prepare and then connect the Monitor, Camera and Power cables. See following steps on how to make the installation. 1) Precaution -No impacts or heavy loads should be applied on the product.
  • Page 32 Chapter 2. Start H7016 3) Connect to a monitor (VGA Monitor or CCTV Monitor) Connect to the VGA port or/and the TV-OUT Port on rear panel of the product 4) Connection of Audio Devices Connect to the Speaker to Audio OUT and Microphone to the Audio IN (use separate amplifiers)
  • Page 33 H7016 User Manual Caution Use shielded audio cable to prevent system damage in the instance of a lighting strike. 5) Sensor & Sensor & Other device connection (examples) 2-16...
  • Page 34 Chapter 2. Start H7016 - Sensor and Alarm connection Connection to the RS-485 Port RS485 port is used for PTZ camera connection. Check your PTZ camera and if it has RS422 option, use the TX+,- and RX+,-. In case of RS485 option, just use TX+,- port.
  • Page 35 H7016 User Manual 6) Connecting a HDD When connecting a HDD the user must follow the connection details and diagram below. Disconnect the Power cable from the DVR* a. Remove the top cover. To open the cover, remove screws on both sides and rear.

  • Page 36: Replace Cmos Battery

    Chapter 2. Start H7016 Caution Ask to your dealer before replacing the HDDs Warning Check HDD’s compatibility before changing The manufacture is not responsible if HDD is defected by the user’s fault Abnormal termination may cause fatal damage on HDD data and HDD.

  • Page 37: Chapter 3 Operating H7016

    This section contains information about the recording, searching, playback and other operating features of the DVR. OPERATING 7016...
  • Page 38 H7016 User manual...

  • Page 39: Log In

    Chapter 3. Use H7016 1. LOG IN (1) LOG IN When system starts it will show a ‘log in’ message. There will be no access to the DVR controls until you have logged in. To log in, select the ‘TOOL’ button from the task bar and then select ‘USER’ as in the...

  • Page 40: Live Mode

    H7016 User manual 2. LIVE MODE (1) SELECT A CHANNEL You can change the live display mode simply by pressing the front panel or remote controller buttons. Live display can be changed from 1,4,9,16,PiP displays. To change display options, press the ‘Live’ button on front panel. The following illustrations are examples of the live display modes.

  • Page 41: Icon

    Chapter 3. Use H7016 (2) ICON In live display the following icons are used to show the system status. Icons on Right Top Full Screen(bottom of right) No HDD, Smart Alarm & HDD Continuous Recording Failure Motion Detection Recording Emergency Recording On...
  • Page 42 H7016 User manual In the Task Bar menu the follow icons have these functions. Instant (emergency) recording function. Once this is started all channels will be changed to CIF resolution and record at full frame rate. PTZ mode function. The user can turn on and off the PTZ features when clicking on this icon.

  • Page 43: Pop Up Menu

    Chapter 3. Use H7016 (3) POP UP MENU Clicking on the right mouse button in the live screen will make the pop up menu appear, as in following picture. Click Right button button Popup Menu Options. HIDE LIVE VIEW : Hide(Covert) selected live channel.
  • Page 44 H7016 User manual channel LOGOFF SEARCH : Move to SEARCH MENU. PTZ : Move to PTZ mode SETUP : Move to SETUPMENU. In Addition The ‘NO SIGNAL’ message appears when no camera is connected or there is no signal detected.
  • Page 45 Chapter 3. Use H7016 The Administrator’ can authorize or restrict the user’s permissions this included the live display and search modes. If the user does not have permission or allowed access to a channel it shows the ‘NO PERMISSION’ message.

  • Page 46: Ptz

    H7016 User manual 3. PTZ System changes to PTZ mode by selecting the ‘PTZ’ option in the pop up menu or by clicking the PTZ icon on menu bar. Step 01 Right Click the Mouse Button Step2 Click on the PTZ Option...
  • Page 47 Chapter 3. Use H7016 To use ZOOM/FOCUS/IRIS controls, click the right mouse button as shown in the below picture. The PTZ setup menu will then be displayed with all the controls for the PTZ. With the ‘PRESET TOUR’ feature, you can make a PTZ camera move automatic by preset positions.

  • Page 48: Search

    H7016 User manual 4. SEARCH (1) SIMPLE SEARCH Pressing the ‘‖>’ button on the front panel will start the playback of the most recently recorded file. Use the buttons front panel or the JOGSHUTLE to control the playback. The user can...

  • Page 49: Quick Backup In Playback

    Chapter 3. Use H7016 (2) QUICK BACKUP IN PLAYBACK This feature enables the backup of data whilst in the playback menu. Click the backup button on playback taskbar, front backup button sets the start time of backup and this displayed on top of right above the task bar.

  • Page 50: Calendar Search

    H7016 User manual (3) CALENDAR SEARCH Use the calendar search to specific a time and date using a calendar and timeline bar. Move the ‘Blue bar’ in time line to select the time to search the recordings. The color of time bar differs by its recording status (the recording colors explained above).

  • Page 51: Event Log

    Chapter 3. Use H7016 (4) EVENT LOG The event log displays the events recorded on the DVR by the user selection of event type. The event log can be used to play events or save the log file on to an external storage device as a text file.

  • Page 52: Jump To First Saved Data

    H7016 User manual (5) JUMP TO FIRST SAVED DATA This will move the playback location to the first recording time out of the existing data. (6) JUMP TO LAST SAVED DATA This will move the playback location to the last recording time out of the existing data.

  • Page 53: Dst (Daylight Saving Time)

    Chapter 3. Use H7016 (7) DST (DAYLIGHT SAVING TIME) The DVR system will change its time according to the configured DST zone setting. This depends on your DST setting if you use this DVR in a country with DST changes, please turn this option on.

  • Page 54: System Log

    H7016 User manual (8) SYSTEM LOG The system records detailed log information for the general operation of the DVR. User can check the log by the SETUP>>INFORMATION >> SYSTEM LOG and export this information as a text file to an external storage device.

  • Page 55: Chapter 4 H7016 Setup

    H7016 SETUP...
  • Page 56 H7016 User Manual...

  • Page 57: Setup Menu

    Chapter 4. H7016 Setup SETUP MENU (1) ABOUT SETUP Main Classification Sub Classification SYSTEM CONFIGURATION DISK CONFIGURATION SYSTEM USER CONFIGURATION CONFIGURATION SHUTDOWN CAMERA CONFIGURATION PTZ CONFIGURATION CAMERA SPOT/SEQUENCE CONFIGURATION MONITOR CONFIGURATION RECORD CONFIGURATION RECORD MOTION/EVENT CONFIGURATION NETWORK CONFIGURATION NETWORK SERIAL CONFIGURATION...

  • Page 58: System Setup

    H7016 User Manual 2. SYSTEM SETUP To enter the setup menu the user can press the ‘SETUP’ button on the front panel or use the mouse and task bar menu via Tool > Setup as below Step 01 Use the mouse click on Tool then select Setup.

  • Page 59: System Configuration

    Chapter 4. H7016 Setup (1) SYSTEM CONFIGURATION This menu shows the whole system status and can be used for setting up the general configurations on the system. To convert between NTSC/PAL, use the switch on rear side of this product. After switching between video formats you must restart system.
  • Page 60 H7016 User Manual TIME & DATE: When you click on the time and date areas you can change the time and date settings of the DVR. If you are using the NTP function the time and date options will not be available.
  • Page 61 Chapter 4. H7016 Setup Clicking the TIMEZONE option will show the following pictures Select the local timezone where the system is located and then click ‘Ok’. The System will automatically update for DST if selected area is in a DST timezone. (DST: DAY LIGHT SAVING TIME).
  • Page 62 H7016 User Manual Select the NTP Type box and the menu below will appear. NTP Setup (NTP SERVER) : There are two options for time synchronization. (1) By each DVRs time (2) By using NTP server. Time sync. Set the time interval between synchronization.
  • Page 63 Chapter 4. H7016 Setup Clicking on the S/W Upgrade box allows the user to upgrade system. The ‘UPGRADE FIRMWARE’ will appear and the user should select which device the software upgrade files are located - DVD/CD/USB/FTP. Upgrade with USB memory : Insert USB memory to the USB port on the product Click the ‘SCAN’...

  • Page 64: Disk Configuration

    H7016 User Manual (2) DISK CONFIGURATION This menu displays the information about the HDD installed on the DVR. The user can define ‘overwrite’ function on/off when HDD is full and format HDD, check S.M.A.R.T verification. The number of Built in HDD’s can vary according to its model.

  • Page 65: User Configuration

    Chapter 4. H7016 Setup (3) USER CONFIGURATION In user configuration, you can add, delete and change each user’s permission or login authorization. To add a new user : Click on the ‘ADD/CHANGE’ Enter the username and password for the new account.
  • Page 66 H7016 User Manual To change a Users permissions : Decide which user to change from the users list. Click the ‘ADD/CHANGE’ button. Then the ‘USER ADD/CHANGE’ menu will be displayed as above. Change permissions for the user and then click ‘OK’ to save.

  • Page 67: Configuration

    Chapter 4. H7016 Setup (4) CONFIGURATION The System configuration file can be export/import in this menu. Export means save current DVR setup file on to an external devices such as USB Import means load a saved setup file from an external device such as CD/DVD/USB to the DVR system.

  • Page 68: Camera

    H7016 User Manual CAMERA (1) CAMERA CONFIGURATION This menu is for setting up the camera configuration with the DVR. The Hidden feature is to select hide (covert) channel on live and search screens. Press ‘ADJUST’ to change image settings. The image settings that can be changed for each channel and are selectable for Brightness, Contrast and Color.

  • Page 69: Ptz Configuration

    Chapter 4. H7016 Setup (2) PTZ CONFIGURATION This menu is used to configure any connected PTZ cameras. PROTOCOL :Select the camera protocol that is used for the connected PTZ camera. ID : Enter the ID number the same as the connected PTZ camera’s ID.

  • Page 70: Spot/Sequence Configuration

    H7016 User Manual (3) SPOT/SEQUENCE CONFIGURATION In this menu the user can set the options for Spot and Sequence control on the DVR, SPOT: Configuration for the Spot monitor output of the DVR. (The time can be configured from 1 to 100 seconds) Interval: This is the time setting between which the cameras are rotated in the sequence mode for the spot output.

  • Page 71: Monitor Configuration

    Chapter 4. H7016 Setup (4) MONITOR CONFIGURATION Configure the monitor output and display settings. Transparency Setup: Sets the transparency of the setup menu, so the user can still monitor the live screen when in setup. ‘0’ means no transparency and this is selectable in a range of 0-30.

  • Page 72: Record

    H7016 User Manual RECORD (1) RECORD CONFIGURATION ①FRAME There is an option to switch On/Off which channels are recording. If the user does not want to record a selected channel, set it ‘off’. Then the system will not record that channel regardless of its input.
  • Page 73 Chapter 4. H7016 Setup The Quality effects on the size of recorded data size and picture quality. Low quality setting has a smaller recording data size but also has low image quality. Higher resolution has a clear image but requires large recording data size. When you setup the recording configuration you must consider the quality setting and storage retention required.
  • Page 74 H7016 User Manual ② SCHEDULE Use to set the recording schedule on each camera individually or to all channels. The user can define the schedule by a single hour interval. Types of recording follows: No color – NO Recording This means no recording status. The recording schedule setup has more priority than ‘FRAME’...
  • Page 75 Chapter 4. H7016 Setup Pink – Motion detection (MOT) + Sensor detection (SENS) Recording The unit does not record unless there is a motion event detected or a sensor triggered. If the ‘motion/event menu configuration is set to ‘OFF’ the DVR system doesn’t record at any time nor trigger any event even if there is motion or a sensor event.
  • Page 76 H7016 User Manual The system can have up to 32 different Holiday setup on its recording configuration schedule. After making a recording schedule click on the holiday option and the screen below will appear. Set ‘Date’ that you want then unit to use the recording schedule and then input a Description for the holiday.
  • Page 77 Chapter 4. H7016 Setup ③ AUDIO In the Audio menu the user can select 4 audio input and 1 audio output. To listen to live audio, you must set the audio channel on to a correspondent camera channel. The Two way audio feature is available which allows live streaming of audio from DV R to remote and vice versa.
  • Page 78 H7016 User Manual ④ INSTANT The instant recording menu is where the user can make the setting for the instant rec ording button on the front panel of the DVR. The unit will always change to the insta nt recording setting configuration whenever the button is pressed, this function is usual ly used for alarm or emergency scenarios.

  • Page 79: Motion/Event Configuration

    Chapter 4. H7016 Setup Tip – Instant Recording (Emergency Recording) If ‘Instant recording’ button is located on the front panel, press this button to start ‘Instant’ recording. Instant recording mode overrides other alarms set and records in is displayed on live mode to indicate that ‘Instant continuous mode.
  • Page 80 H7016 User Manual ② SENSOR In this Sensor menu the user can configure the sensor inputs and the alarm outputs. Sensor : On a 16 channel DVR there are up to 16 sensor inputs. Use the menu to set the sensor type which will either be N/O (Normal Open) and N/C (Normal Close).
  • Page 81 Chapter 4. H7016 Setup SENSOR is a type of detection device which will then send an electric signal when triggered. If the sensor does not work, check sensor type first. If the sensor type is different to your configuration then change the type on the DVR ③...
  • Page 82 H7016 User Manual Duration: This is the time that the alarm output signal remains active. The default value is 5sec. and 1-100 sec. is available. Preset: This function move a PTZ camera to defined preset position when an event is triggered.

  • Page 83: Network

    Chapter 4. H7016 Setup Network Setup: User should enter the IP address of the remote client and which port number (default port is 2000). Up to 5 different remote IP address are available. The Alarm monitor feature provides video clip and information of event triggered by sensor or/and motion.
  • Page 84 H7016 User Manual Port Numbers: The Default ports are in the picture below, if you need to use different ports then make sure the same port numbers correspond on the remote software. Transfer speed: The user can define network transmission allowance (bandwidth) from 25kbps to 100Mbps.

  • Page 85: Serial Configuration

    Chapter 4. H7016 Setup ID: Enter the registered ID for the DDNS account Password: Enter the registered password for the DDNS account Status: Use this option to check that the DDNS account is working, this can be done by clicking on the check option.

  • Page 86: E-Mail Server

    H7016 User Manual Set the ‘BAUD RATE, DATA BIT, PARITY, STOP BIT’ information to match the external devices communication configuration. (3) E-MAIL SERVER The Email configuration is for setting up the DVR as an Email server. This is so the user can receive an email message to their account for when changes or alarms happen on the DVR.

  • Page 87: Information

    Chapter 4. H7016 Setup Type: Toggle the Type between ON/OFF to setup e-mail server. Option: On each mail account the user can choose which options such as ‘Motion detection/Sensor/ Video Loss/ Power/ Setup/ Login/ Login Fail/ Disk full & S.M.A.R.T’ will send an email message.

  • Page 88: System Status

    H7016 User Manual Search Options: The system log can be searched by 3 different categories, System, Setup and Network. The user can select ALL if they want to search all categories. The search results are shown in the system log table. The user can move between pages using the arrow keys above the table.
  • Page 89 Chapter 4. H7016 Setup Recording Start: This shows the oldest data of recorded data on the DVR. Recording End: This shows the last time that data was recorded by the DVR Disk Capacity: This shows the total storage on the DVR.
  • Page 90 H7016 User Manual ③ AUDIO This menu displays the current activation audio status. ④ SENSOR This menu displays the current sensor status. 4-36...
  • Page 91 Chapter 4. H7016 Setup ⑤ NETWORK This menu displays the current network status. ⑥ EVENT PAGE This menu displays the current event status 4-37...

  • Page 92: Version

    H7016 User Manual (3) VERSION The version menu displays all the general system information. 4-38...

  • Page 93: Quick Setup

    Chapter 4. H7016 Setup Here the user can also check which Video format is set on the DVR – NTSC or PAL. If you have any issue with the product you may be asked by your distributor to supply them with the firmware version installed on the DVR.
  • Page 94 H7016 User Manual for the DVR. In the quick setup menu there are options for adjusting the recording Resolution, FPS, and Recording mode. These settings are applied to all the channels on the DVR. There is a display to show the recording duration when the changes are made. This is so the user can adjust the recording and at the same time the recording retention.

  • Page 95: Backup

    Chapter 4. H7016 Setup Resolution: Select from CIF (352X240), 2CIF (704X240) and D1 (704X480) Recording Mode: Select the recording modes. (See schedule section for details) Average FPS: Select the fps used for recording. Average Picture quality: Select the picture quality for recording.
  • Page 96 H7016 User Manual (1) BACKUP This allows the user to export any important recordings to an external device. The backup is available onto an ODD or an external USB device. 1. To make a backup of recorded data: Press ‘Backup’ button 2.

  • Page 97: Auto Usb Backup

    Chapter 4. H7016 Setup One the scan is complete select a device to export the recordings 4. Select which channels are to be exported for the backup 5. Enter the start/end times of the recording. 6. Click the ‘ESTIMATE’ button to display an estimate of the required space.

  • Page 98: Backupviewer

    H7016 User Manual automatically. To make an Automatic backup onto USB : 1. Press ‘Backup’ button. 2. System displays the ‘Export’ page. 3. Click on the ‘AUTO USB BACKUP’ tab on the bottom right of the screen. 4. Click the ‘SCAN’ button and select the USB media to save.
  • Page 99 H7016 User Manual...
  • Page 100 Chapter 4. H7016 Setup the converting the backup to AVI format. Insert the Backup device in to your PC, the Backup viewer will then run automatically. (The autorun feature will not happen if you didn’t select export viewer when making the backup) To playback using the backupviewer : 1.

  • Page 101: Backupviewer Options

    H7016 User Manual Backup Viewer Options Convert to avi format Zoom in / out Save a still image Print a still image (4) BACKUPVIEWER OPTIONS Backup viewer has several convenient options. 4-46...
  • Page 102 Chapter 4. H7016 Setup DirectDraw : This is for a PC which doesn’t support ‘Direct Draw’. The user must restart backupviewer after changing this option. De-Interlace : Improve playback picture quality when playing back D1 (704x480) data. Following pictures shows the difference between interlaced and de-interlaced images.

  • Page 103: Chapter 5 Troubleshooting Guide And Glossary

    Troubleshooting Guide and Glossary...
  • Page 104 Troubleshooting Guide (FAQ)  Problem with Startup Problem Possible Causes Possible action Please check whether power cable is correctly connected. It doesn’t work or Power may not be supplied switch on. to the unit. Please check whether power source has the recommended power capacity.
  • Page 105  Display Startup Problem Possible Causes Possible Action Camera may not have Check whether the camera is installed properly been installed properly Slow image display Camera image is projected Connect the camera directly to another unevenly or is not monitor and check the operation status operating properly Camera image is projected Connect the camera directly to another...
  • Page 106  Sensor/Alarm Detection Problems Possible causes Actions Set the recording mode to sensor recording and Sensor/Alarm is not set There is no then select the alarm output port. reaction from the You may have used the alarm even if the Use an A Type sensor wrong type of sensor sensor has...
  • Page 107  Recording Mode: Motion Detection Problems Possible causes Possible actions There is a movement, The sensitivity is set too Set a higher sensitivity value in the recording but the recording is not setting. initiated The sensitivity is set too Set a lower sensitivity value in the recording Recording starts high setting...
  • Page 108 Program was network. You may use cross cable or direct successfully cable executed, but not Test connecting the PC and H7016 directly, properly connected There is an error in the using cross cable. If it works then start network environment checking the network environment.

  • Page 109: Glossary

    Glossary DVR (Digital Video Recorder) A DVR is a video storage device that compresses and stores camera data processed in a digital signal format. This system integrates a screen conversion switch, screen divider, VCR, sensor and alarm controller, into a single digital recording system. DVRs use technology based on video algorithm H.264, MPEG, MJPEG etc.
  • Page 110 PAL (Phase Alternate Line) PAL is a TV broadcast standard which was developed by the Telefunken Company of Germany in 1967. The PAL method is a broadcast method with a scanning rate of 25 frames per second. It has fewer frames compared to NTSC but it has a greater number of straight scanning lines, with 625.

  • Page 111: Product Warranty Card

    Product Warranty Card Product name: Date of purchase: Serial NO: Place of purchase: ● Guarantee Clauses The high quality of the product is guaranteed by strict quality control. The warranty period of the product is for one year from the purchase date. Within the warranty period, malfunctions occurring without apparent cause during normal operation will be given A/S service free of charge.

Table of Contents