Using The Display Correctly; Example Of A Hierarchy - Pioneer DVH-865AVBT Operation Manual

Additional information
W h e n u s i n g a n i P o d , a n i P o d D o c k
Connector to USB Cable is required.
A Pioneer CD-IU51V interface cable is also
available. For details, consult your dealer.
About the file/format compatibility, refer to
the iPod manuals.
Podcast: Compatible
CAUTION
Pioneer accepts no responsibility for data
lost on the iPod, even if that data is lost
while this unit is used.

Example of a hierarchy

( )
0
1
2
♪
①
♪
②
3
♪
③
♪
④
♪
⑤
4
5
♪
⑦
♪
⑧
6
7
♪
⑨
Layer1 Layer2 Layer3 Layer4
External storage device (USB)
The playback sequence is the same as the
recorded sequence in the external storage
device (USB).
To specify the playback sequence, the
following method is recommended.
Create a file name that includes numbers
that specify the playback sequence (e.g.,
01xxx.mp3 and 099yyy.mp3).
Put those files into a folder.
Save the folder that contains the files to
the external storage device (USB).
H o w e v e r , d e p e n d i n g o n t h e s y s t e m
environment, you may not be able to specify
the playback sequence.
For USB portable audio players, the
sequence is different and depends on the
player.
♪
⑥
○ Root Folder
Folder
♪
File
Layer5

Using the display correctly

CAUTION
If liquid or foreign matter should get
•
inside this unit, turn off the power
immediately and consult your dealer
or the nearest authorized PIONEER
Service Station. Do not use the unit in
this condition because doing so may
result in fire, electric shock, or other
failure.
• If you notice smoke, a strange noise
or smell, or any other abnormal signs
from the display, turn off the power
immediately and consult your dealer
or the nearest authorized PIONEER
Service Station. Using this unit in this
condition may result in permanent
damage to the system.
• Do not disassemble or modify this unit,
as there are high-voltage components
i n s i d e w h i c h m a y c a u s e e l e c t r i c
shock. Be sure to consult your dealer
or the nearest authorized PIONEER
Service Station for internal inspection,
adjustments, or repairs.
Handling the display
When the display is subjected to direct
•
sunlight for a long period of time, it will
become very hot resulting in possible
damage to the LCD screen. You should
avoid exposing the display unit to direct
sunlight as much as possible.
• The display should be used within the
temperature range of –20°C to +60°C.
At temperatures higher or lower than this
operating temperature range, the display
may not operate normally.
Liquid crystal display (LCD) screen
• Heat from the heater may damage the
LCD screen, and cool air from the cooler
may cause moisture to form inside the
display resulting in possible damage.
Also, if the display is cooled down by the
cooler, the screen may become dark,
or the life span of the small fluorescent
tube used inside the display may be
shortened.
• Small black dots or white dots (bright
dots) may appear on the LCD screen.
Appendix
05
35
En