Slideshow Playback - JVC Everio GZ-R10 User Manual

Playback
During Still Image Playback
When this unit is not operated, the operation buttons on the touch screen
0
disappear automatically. Tap on the screen to display the operation
buttons again.
Display
A Video/Still Image Switches between video and still image
Mode modes.
A/B
Returns to the previous still image
B h
You can perform the same operation with the
0
zoom lever.
C d / e Starts/pauses slideshow
The same operation can be performed with
0
the SET button.
Advances to the next still image
D g
You can perform the same operation with the
0
zoom lever.
Switches to the recording mode.
E 3
Returns to index screen
F u
Deletes the currently displayed still image.
G R
H MENU Displays the menu screen
Memo :
Tap or drag on the operation area of the touch screen.
0
Caution :
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
"Resetting this Unit" (A p. 6)
52
Description

Slideshow Playback

Still images can be played back in a slideshow.
Tap I during still image playback to start the slideshow.
"Operation Buttons for Still Image Playback" (A p. 51)
Memo :
Effects can be added to the transitions in slideshow playback.
0
" SLIDE SHOW EFFECTS " (A p. 88)