Step 3 - Adjust The Colors - Clarity WN-5220-V User Manual

Step 3 - Adjust the Colors

Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
To adjust the colors, first match the luminance (brightness) and the
color of white. Do this for each one of the displays. Then match the
intermediate shades of gray.
The color balance menu provides control over the individual RED,
GREEN, and BLUE settings to balance the white color, as well as an
ALL adjustment to control the overall luminance. In addition, similar
control for the RED, GREEN, and BLUE settings are provided to
adjust the balance of the gray shades without affecting the white
balance.
For white balancing, the individual RED, GREEN, and BLUE color
selections have a number associated with them between 0 and 31,
with 0 being the least amount of that color, and 31 being the most.
The ALL selection allows all of the balance settings to be adjusted
simultaneously. The up/down arrow keys moves the cursor from
selection to selection, while the left/right arrow keys increment and
decrement the setting.
For gray balancing, the individual RED, GREEN, and BLUE balance
settings have a number associated with them between 0 and 7, with 0
being the least amount of that color at the mid gray level, and 7 being
the most. The ALL selection allows all of the gray balance settings to
be adjusted simultaneously.
WN-5220-V VideoWall User's Guide
Color Balance
Wht Gry
All < > < >
Red 031 007
Green 031 007
Blue 031 007
27