Caller Id Solutions - GE 28861 User Manual

Unit beeps
• Place the handset in the cradle for 0 seconds. If it still beeps, charge battery for
16 hours.
• Clean charging contacts on cordless handset and charge cradle with a soft cloth
or an eraser.
• See solutions for "No dial tone" on previous page.
• Replace the battery.
Memory Dialing doesn't work
• Did you program the memory location buttons correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless handset
• Unplug the AC power adaptor from the wall outlet and the back of the base.
Remove the handset battery. Wait for 30 seconds and plug the AC power
adaptor back into the base and wall outlet. Reconnect the battery and charge
for 16 hours.

Caller ID Solutions

No Display
• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the power adaptor from the base and reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid Caller ID
information during the silent period after the first ring. This message indicates
the presence of noise on the line.
No Caller ID
• In order to receive Caller ID information, you must subscribe to
the standard name/number Caller ID service from your local
telephone company.
37