LevelOne FCS-3081 User Manual page 42

H.264 2-megapixel poe vandal dome camera

Hide thumbs Also See for FCS-3081:

Table of Contents

Alarm Output

Define alarm output signal "high" or "low" as the normal alarm output status

according to the current alarm application.

Triggered Action (Multi-option)

The Administrator can specify alarm actions that will take when the alarm is

triggered. All options are listed as follows:

• Enable Alarm Output

Select the item to enable alarm relay output.

• Send Alarm Message by FTP/E-Mail

The Administrator can select whether to send an alarm message by FTP

and/or E-Mail when an alarm is triggered.

• Upload Image by FTP

Select this item, and the Administrator can assign a FTP site and

configure various parameters as shown in the figure below. When the

alarm is triggered, event images will be uploaded to the appointed FTP

site.

Table of Contents