LevelOne FCS-3081 User Manual page 15

H.264 2-megapixel poe vandal dome camera

Hide thumbs Also See for FCS-3081:

Table of Contents

STEP 3:

Detach the snap-on camera module from the Dome Camera's housing by

unscrewing the module-fastened screw first. Then press the sides of camera

module and pull it slightly up from the housing.

STEP 4:

Thread the power and Ethernet

cables

through

either

the

side

conduit entry or back conduit entry.

Then fasten the Dome Camera's

housing on the Electrical Box with

the two screws.

STEP 5:

Connect the power and Ethernet cables to their connectors on the Dome

Camera unit.

STEP 6:

Attach the snap-on camera module onto the Dome Camera's housing and.

screw the module-fastened screw tightly to secure the camera module.

STEP 7:

Access the camera browser-viewer for viewing images. Please refer to

6. Accessing Camera

for further details. Users can also use the camera's

BNC connector for video output.

Step 8:

Adjust the camera's zoom level and focal length via zoom and focus ring

screws.

STEP 9:

Position the camera at a desired angle by Pan/Tilt/Rotation adjustment.

Table of Contents