HP LaserJet LaserJet4350 Installation And User Manual page 12

INSTALLATION
Cabel position in HP-Stacker
after reinstallation
Numbering of Trays
Depending of how many trays (original HP trays or TowerTray trays) are being used - the TowerTray trays have to
be numbered consecutively. To do so put your unit together and attach the supplied number stickers to the
designated location (see picture). Start with the first (top most) tray after the HP-Unit and continue with the next
number after that one – increase with every tray downwards.
Fixing the TowerTray to the building (only HP LJ 4250/4350 if using more than 2 HP-Trays)
To meet requirements for absolute toppling security the TowerTray /
HP LaserJet 4250/4350 unit has to be fixed to a building wall, if more
than 2 additional HP-Trays are used.
Position a: use the HP-Tray screws to affix the provided bracket in the
accessory to the topmost HP-Tray.
Position b: use two screws and screw anchors to affix the bracket to
the building's wall.
Manual 0545
Attach self addhesive
number stickers to the
approprate positon
10
TowerTray
TM
for the HP LaserJet 4200 / 4300 / 4250 / 4350