Safety Measures; Fundamental Safety Notices - Nardi Compessori Pacific 210 Instruction Manual And Spare Parts Catalogue

5. SAFETY MEASURES

5.1. Fundamental safety notices:

Important instructions concerning the endangerment of personnel, technical safety and operating safety will be specially emphasized by
special marks placing on the machine.
For safety reasons you can find some components mounted on the compressors in order to prevent damages. These parts must not be
changed or removed in any case. Before please consult our technician.
5.2. Authorized use :
The unit is built according to state of the art technology and established safety technical regulations. Neverthless, its use can cause danger
to life and limb of the operator or third parties or damage to the machine and other equipment. Operate the unit only in technically perfect
condition in accordance with regulations and safety danger notices detailed in the instruction manual. The manufacturer/supplier is not re-
sponsible for damage resulting from a wrong utilisation of the machine. The user alone is responsible for this risk. The compressor is built to
produce top quality breathing air according to DIN EN 12021 rules.
5.3. Safety notices for operation :
Ensure that only trained personnel work with the machine.
•
Filling hoses must be in satisfactory condition and threads undamaged..
•
Ensure intake air is free from noxious gas,exhaust fumes and solvent vapour.
•
The use of petrol and diesel compressors is forbidden in indoor place.
•
Check the unit externally for damage and faults periodically. Inform the department/person responsible immediately if anything is not
•
as is should be (including opearation). If necessary, shut the machine down immediately and make it safe.
Observe switching on and off processes and monitoring indications according to the instructions manual.
•
Use only Nardi original parts and equipments.
•
Drain the valve regularly if manual drain valve. Check every ten minutes the valve if automatic drain valve.
•
Switch off the machine when do not use it.
•
Clean oil, fuel or care products from, the machine, in particular the connections and screw joints, before carrying out
•
maintenance/repairwork. Do not use aggressive cleaning fluid. Use a fibre-free cleaning cloth.
Completely remove all covers/seals after cleaning.
•
Use only original fuses with specified current rating. If there is a failure in the electric energy supply, shut the machine/unit down
•
immediately.
Work on elelectric units or operating equipment may only carried out by a qualified electrician or by a person under the instruction
•
and supervision of qualified electrician according to electric technical regulations.
The electrical equipment of a unit must be regularly checked.
•
When working in small rooms, observe any national regulations.
•
Depressurize system and pressure lines before commencing repairwork.
•
With regard to oil, grease and other chemical substances, ovserve the relevant safety rules for the product.
•
When switching on the machine, check the arrow to ensure correct direction of rotation of the drive motor.
•
INSTRUCTION MANUAL PACIFIC 210
5