Table of Contents
Advertisement
Product name
Chuter
Paper guide
Automatic paper feed section (ADF)
Copy gray level dial
7 element LED
Function switch
Double-side switch
Send to button
Scan button
Power lamp
Stacker
ÿ
Loads a page of the original.
Guides a page so that it is fed straight.
Reads a page automatically
Adjusts the copy gray level (dark/light) to one of five
levels
- Light on : Next scan shall be done by Simplex
- Blinking : Next scan will be Duplex
- >
: This sign appears for three (3) seconds when you
push "Scan" button or "SendTo" button.
It shows Registered Application has been started
up. Only, when Launcher is not started up in
advance, application would not start even though
this indication appears. Select "Start" menu →
"Startup" → "M30931DC Launch" to start up
Launcher.
As it normally starts up automatically when you
turn the PC power on, it is unnecessary.
Refer to HELP in Launcher about the details of
"Scan" as well as "SendTo" button functions.
- P or 0
It indicates the scanner is under initialization. As
soon as "1" appears, push the "next" button.
Sets the number of copies.
Changes the read mode.
The read mode is displayed on the copy count display
panel
Copies the loaded page.
Scans the loaded page.
On when power is turned on.
Stacks read pages.
Function
Advertisement
Table of Contents
