INSTRUMENT AND CONTROL FUNCTIONS
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust chamber.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
3
system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
EAU13430
Seats
Rider seat
EWA10860
To remove the rider seat
1. Insert the key into the seat lock,
and then turn it as shown.
ECA10700
1. Rider seat lock
2. Unlock.
2. Pull the rider seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
EAU14080
1. Projection
2. Seat holder
2. Remove the key.
Passenger seat
To remove the passenger seat
1. Remove the rider seat.
2. Pull the passenger seat up.
To install the passenger seat
1. Slide the receptacle on the rear of
3-11
the passenger seat over the seat
holder as shown, and then push
the front of the seat down.