Disconnecting The Ipod (Iphone) - Scion PT546-18130 Owner's Manual

NOTICE
• If you install an audio system
other than a Scion Genuine
Audio, you will not be able to
use the USB connector.
• If the iPod does not operate
with Scion Audio system,
disconnect the connector from
the iPod and reconnect again.
• When you are using iPhone by
the multitasking, according to
the application under use, it
might not be able to charge a
battery.
• When connecting a Bluetooth
enabled iPod via the Dock
connector, the iPod or
Pandora ® may not produce
any sound on this unit. If
this happens, turn the iPod
Bluetooth function off.
3
<CRB3839-A/S>3
CRB3839AS_ZJ029.indd 32
NOTICE
If this product does not recognize
or otherwise behaves erratically
when an iPod/iPhone that has
been updated with the latest
software/firmware (iTunes) is
connected, follow the steps
below.
1. Disconnect the iPod/iPhone
cable and then reconnect it.
2. Turn the iPod/iPhone off and
then turn the device back on
again.
3. Disconnect the cable from the
iPod/iPhone and reset them.
After starting up the iPod/
iPhone, connect the product
using a cable.
Disconnecting the iPod
(iPhone)
Remove the connector.
When disconnecting the iPod
connector, grasp the connector
firmly and pull it towards you.
2012/03/05 9:31:13