Using The Laser Pointer - Interlink electronics RemotePoint Onyx User Manual

Using the Laser Pointer

Press the button on the front of the remote to
activate the laser pointer. The
laser pointer can be used to
highlight important points on
slides and graphs.
Using with a Macintosh
The remote control has three different
compatibility modes. The light on the USB
receiver will blink one to three times every
second or so to tell you which mode your
receiver is currently set to.
Mode 1:
Windows computers running Microsoft
PowerPoint.
Mode 2:
Macintosh computers running Keynote.
Mode 3:
Macintosh computers running Microsoft
PowerPoint.
Page 9