Interlink electronics VP4750 Advanced Features Setup

P4750 Bluetooth touchPad Remote – advanced FeatuRes setuP
The VP4750 has several advanced features that can be turned on or off from the Advanced Setup Mode. To
access any of the features listed below, first enter Advanced Setup Mode and then press and hold the specified
button(s) for that feature. The remote will then automatically exit Advanced Setup Mode.
To enter Advanced Setup Mode:
.
2.
3.
4.
advanced FeatuRes

touchpad tapping:

This feature enables tapping on the Touchpad to generate Left Mouse button clicks. This feature is set to
Disabled in the factory default settings.
To Enable this feature:
.
2.
To Disable this feature (i.e. to revert to factory default):
.
2.

scrolling:

This feature enables sliding your finger on the Scroll Strip to cause vertical scrolling in a document or web
page. This feature is set to Enabled in the factory default settings.
To Enable this feature (i.e. to revert to factory default):
.
2.
Turn OFF the remote.
Simultaneously, press and hold all three of these buttons:
▪ Left Mouse button (i.e. click-trigger)
▪ Right Arrow button
▪ Blank Screen button
While holding these three buttons, slide the Power Switch to ON and release it.
The green LED will blink rapidly while in Advanced Setup Mode.
Enter Advanced Setup Mode (see above)
Press and hold the following button for > 2 seconds:
▪ Right Mouse button
Enter Advanced Setup Mode (see above)
Press and hold the following button for > 2 seconds:
▪ Blank Screen button
Enter Advanced Setup Mode (see above)
Press and hold the following button for > 2 seconds:
▪ Right Arrow button