Table of Contents
Advertisement
Removing the Trays Transportation Inserts
For shipping, the bottom plate of the TowerFeed
tray is secured with transportation inserts. These
have to be removed before loading the trays.
Pull out, lift upwards and pull out the trays from
TowerFeed. Remove the transportation inserts
(Fig. 10). There are two at each side (please
keep
the
inserts
shipment).
Re-insert and close the trays.
Note:
In the right side plate of the tray you will find
white coding pins for the respective paper
size. These are set by the factory and must
not be changed.
Installing the PPCA in the Printer
The PPCA (Paper Path Connection Assembly, Fig.
11) from the accessories box has to be installed in
the printer to guide and transport the paper delivered
from TowerFeed inside the printer.
Open the right side cover of the printer.
Take the PPCA - with the black rollers towards
you and the gearing to the right - and retract the
gray sliders with the metal bolts.
Slide the PPCA into the gap behind the right
side cover of the printer and release the sliders
to let the bolts snap into position (Fig. 12).
IU 675 / 0150
for
eventual
later
re-
Fig. 10
TowerFeed tray with transportation inserts
Fig. 11
PPCA
Fig. 12
Installing the PPCA in the printer
7
TowerFeed
INSTALLATION
TM
for the HP LaserJet 9000
Advertisement
Table of Contents
