Maintenance; Accessories; Troubleshooting; Cleaning - Black & Decker ST4500 Instruction Manual

b.Insert the end of the line no
more than 1/8 in. into the hole
and begin winding the line
around the spool (figure 16).
Be sure to wind the line in the
direction of the arrow in figure
17. Do not overfill spool. The
spool holds 20 feet (6 m) of
line.
c.Perform steps 3 and 4 above.

Troubleshooting

Problem Possible Cause
•Unit will not start. • Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker
is tripped.
• Cord or switch is
damaged.
For assistance with your product, visit our website www.blackanddecker.com
for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
16
17
Possible Solution
• Plug in cord.
• Replace circuit fuse.
• Reset circuit breaker.
• Have cord or switch
replaced at
Black & Decker
Service Center or
Authorized Servicer.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any

CLEANING

liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by Black &
Decker service centers or other qualified service organizations,
always using identical replacement parts.
Recommended accessories for use with your tool are available

ACCESSORIES

from your local dealer or authorized service center. If you need
assistance regarding accessories, please call: 1-800-544-6986.
WARNING
recommended for use with this tool could be hazardous.
Black & Decker offers a full network of company-owned and

SERVICE INFORMATION

authorized service locations throughout North America. All Black &
Decker Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location nearest
you. To find your local service location, refer to the yellow page
directory under "Tools—Electric" or call: 1-800-544-6986.
Black & Decker (U.S.) Inc. warrants this product for two years
FULL TWO YEAR WARRANTY
against any defects in material or workmanship. The defective
product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store
is a participating retailer). Returns should be made within the time
period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
8
The use of any accessory not
: