Operating Instructions; Assembly Instructions - Delta 36-220 Instruction Manual

FOREWORD
Delta Model 36-220 is a 10" Compound Miter Saw designed to cut wood. It can crosscut up to 2-
45 ° both left and right 2-
stops at 0 ° , 15 ° , 22.5 ° , 30
includes the following features; Double Insulated construction for operator safety, D-handle design with trigger switch
for positive control, lock-out button to prevent accidental starts, Electric brake automatically stops blade in seconds,
Automatic retracting see-thru blade guard, Built-in arbor lock for easy single wrench blade changes, Dust bag, Work
supports, Extra-wide fence and Replaceable cut-thru table insert for optimum chipbreaking.
Remove the miter saw and all loose items from the carton. IMPORTANT: DO NOT LIFT THE MITER SAW BY THE
SWITCH HANDLE OR TABLE CONTROL HANDLE AS THIS MAY CAUSE MISALIGNMENT. ALWAYS LIFT THE
MACHINE BY THE BASE.
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE
UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE
ENTIRE OWNER'S MANUAL.
WARNING: MAKE CERTAIN THE POWER CORD IS DISCONNECTED FROM THE POWER SOURCE
DURING THE COMPLETE ASSEMBLY PROCEDURE.

OPERATING INSTRUCTIONS

3 1
" x 3- ", bevel at 45 ° left 1-
/4 /2
° , and 45 ° degrees both left and right, and positive bevel stops at 0
UNPACKING

ASSEMBLY INSTRUCTIONS

3 1
" x 5- ", and compound 45
/4 /8
Fig. 1
5
3 1
5- ", miter at
" x
/4 /8
3 1
° x 45 ° , 1- " x 3- ". It has miter
/4 /2
° and 45 ° left. It also