Assembly Instructions - Bella Nutripro Instruction Manual

assEMblY InsTRUCTIons

WARNING: ALWAYS MAKE SURE COLD PRESS JUICER IS UNPLUGGED
BEFORE STARTING ASSEMBLY.
IMPORTANT: The Cold Press Juicer's safety system prevents the unit from being turned ON
unless it is completely and properly assembled .
1 . Place the motor base on a flat, stable surface .
2 . Check to make sure the groove in the rubber seal ring is properly attached to the center hole
in the bottom of the processing bowl . (See Figure 2 . )
3 . Line up the black bar of the processing bowl with the motor base handle, making sure
the 4 bowl locks on the motor base are directly above the 4 holes in the bottom of the
processing bowl . Press down firmly . An audible click can be heard as the processing bowl locks
in place . (See Figure 3 . )
fIGURE 2
Center Hole
Rubber Seal Ring
Groove
7
SO-309848_BELLA NutriPro_IM_r5.indd 7
fIGURE 3
Bowl Locks
Processing
Bowl
Bowl Locks
12-09-04 2:18 PM