Avision ScanQ FF-1302S User Manual page 11

The Power
displaying either a solid or flashing color, depending on the
action, as specified below.
Scanner Status
Indicators
A quick flashing Power
as specified below.
Error
Indicators
button indicates the scanner status by
When the Power
been powered off.
LED Light Meaning
Green
Ready to scan at 300 DPI (default when
Solid
powered on)
Green
Scanning at 300 DPI
slow flash
If you have initiated the steps to calibrate
the scanner, the green slow flash indicates
that scanner is in "calibration" mode. For
information, refer to the "Calibrate your
scanner" section on page 5-1.
Orange
Ready to scan at 600 DPI
solid
Orange
Scanning at 600 DPI
slow flash
Red solid
Ready to scan at 1200 DPI
Red slow
Scanning at 1200 DPI
flash
LED Light Meaning
Red quick
Feeder jam or scanner cover opens.
flash
Green,
Built-in disk or memory card full (flash
Orange, or
color depends on DPI setting) or scanned
Red quick
page exceeds allowable length
flash
1-5
button is dark, the scanner has
button indicates an error state,
User's Manual