Using The Connection Screen - Epson EB-826W Operation Manual

Connecting to a Projector on a Network and Projecting
D
When Projector keyword is set to "On" from the projector,
the keyword entry screen is displayed. Enter the keyword
displayed on the LAN standby screen, then click "OK".
When the connection is complete, the computer screen is
projected. The following EMP NS Connection toolbar is displayed
on the computer screen. You can use this toolbar to operate the
projector and make settings, and to disconnect the network
connection. For details on using the toolbar, see the following section.
When changing presenters and so on, and when continuously
q
connecting from another computer, start EMP NS Connection from
the computer you want to connect. The computer that is currently
connected is disconnected, and it is then connected with the
computer that is trying to connect now.

Using the Connection Screen

Select EMP NS Connection to display the following screen. The
operation of each button or item is described in the following table.
When the system starts in Advanced Connection Mode.
15