2.4 GHz Portable Station KX-TD7684C Model No. Thank you for purchasing a Panasonic 2.4 GHz Portable Station. Please read this manual carefully before using this product and save this manual for future use. Please use only the battery provided and charge the battery for about 7 hours before using the handset for the first time.
Table of Contents Before Initial Use....................4 Accessories (included) ..................4 Installation......................5 Battery Installation....................5 Charger Connection ...................5 Charging the Battery ..................5 Charger Wall Mounting ..................6 Attaching the Belt Clip and Belt Clip Holder............6 Before Operating the Handset ................ 7 Location of Controls ...................7 Key Lock ......................8 Meeting Mode ....................9 Selecting the Display Language ..............10...
Page 3
Character Mode Table ..................43 Locking the Handset Phonebook ..............44 Locking the Handset Phonebook ..............44 Unlocking the Handset Phonebook ..............44 Unlocking the Handset Phonebook Temporarily ..........44 Deleting Stored Items..................45 Deleting Stored Items in Handset Phonebook/Hot Key Dial/Outgoing Call Log/Incoming Call Log ..................
Before Initial Use Please read “Important Information” on page 60 before using. Read and understand all instructions. Accessories (included) Accessories (included) AC adaptor ....... One Charger ......One Battery ......One [Part No.] [Part No.] [Part No.] PQLV207 PSWETD7684M N4HHGMB00005 or HHR-P103 Belt Clip ......
• Fasten the AC adaptor cord to the cord holder. • Use only the Panasonic AC adaptor PQLV207. Charging the Battery Charging the Battery At the time of shipment, the battery is not charged. Please charge the battery for about 7 hours before using the handset for the first time.
Before Initial Use Charger Wall Mounting Charger Wall Mounting 1. Install the two included screws in the wall, spacing them 28 mm apart. 28 mm Washer Screws Drive the screw to this point. 2. Mount the charger securely on the wall. •...
Before Operating the Handset Location of Controls Location of Controls [Back View] The headset is an option. Please use only a Panasonic headset below: RP-TCA86/RP-TCA91/ RP-TCA92 Speaker Press POWER for more than 2 seconds. [Power On] Standby mode [Power Off] Blank display Open the cover.
Before Operating the Handset Ringer/Charger Indicator Display Refer to “Display” on page 14. Headset Jack TALK/SP-PHONE (Speakerphone) Key Left/Right Soft Key Used to make or answer calls, or toggle Used to select the function displayed directly above each key. Functions are between the Receiver/Hands-free displayed based on the current context.
Before Operating the Handset Meeting Mode Meeting Mode Meeting Mode allows you to turn off the ringer and set the handset to vibrate when calls are received. This can be useful in situations where you do not want to be disturbed, such as during a meeting.
Before Operating the Handset Selecting the Display Language Selecting the Display Language You can select the desired language (English/Spanish/French). Press the Joy- Press the Joy- Select “Dis- Press the Joy- Select “ Set- stick. stick. stick. play Option”. ting Handset”. Select “Lan- Press the Joy- Select the desired language.
Before Operating the Handset Editing the Names of the Flexible CO Keys Editing the Names of the Flexible CO Keys You can edit a name for each flexible CO key of the handset. Press the Joy- Press the Joy- Select “Key Press the Joy- Select “...
Before Operating the Handset Adjusting the Ringer Volume Adjusting the Ringer Volume Press the Joystick. Press the Joystick. Select the desired set- Select “ ting. (Step Up/Step Ringer Volume”. Down/Level 1-6/Off) Press the Joystick. • To set the ringer pattern, see page 49. Adjusting the Ringer Volume or Turning the Ringer off Adjusting the Ringer Volume or Turning the Ringer off while Ringing while Ringing...
Before Operating the Handset Changing the Vibrate Setting Changing the Vibrate Setting Press the Joy- Press the Joy- Select “Incom- Press the Joy- Select “ Set- stick. stick. stick. ing Option”. ting Handset”. Select Press the Joy- Select one of the following: Press the Joy- “Vibrate”.
Before Operating the Handset Display Display Date and Time Display Soft Keys (See page 15.) Incoming Call Log Status Auto Answer Within range of a Cell Station (CS) Out of range Call Forwarding (See page 30.) Intercom Indicator Do Not Disturb (See page 30.) Off-hook Status Ringer Volume OFF (See page 12.) Message Waiting...
Before Operating the Handset Soft Keys Soft Keys Icons and information shown on the display will vary depending on the context. To select an item shown on the display, press the corresponding soft keys. Opens the Phonebook. Displayed when in Special character Pressing this key for more than 2 entry mode.
Page 16
Before Operating the Handset Displays the Outgoing Call Log. Used to clear the Memo Alarm dis- play setting. Displays the last dialled number. Used to enter an “X” when storing the Line Access CD. Opens the Incoming Call Log. Disconnects the current call and make another call without hanging Opens the Incoming Call Log Used to register the handset with...
Before Operating the Handset Operation Outline Operation Outline Handset functions are accessed through the display menu and selected with the Joystick and soft keys. The guidance display is shown in standby mode for easy operation. [Function Keys] [In standby mode] [Flexible CO Keys] [Main Menu] [Handset Phonebook]...
Before Operating the Handset Function Menus Function Menus Press the Joystick to display the main and sub menus. Main Menu—While in Standby Mode Ringer Volume: Accesses the “Ringer Volume” setting. New Phonebook: Stores a new item in the Phonebook. Memo Alarm: Accesses the “Memo Alarm”...
Before Operating the Handset Function Keys Function Keys Functions of the handset can be activated through the display key list. Move the Joystick to display the feature key list. 1: Redial Redials the last dialled number. 2: Fwd/DND Displays and/or sets Call Forwarding and Do Not Disturb. 3: Flash/Recall Disconnects the current call and make another call without hanging 4: Auto Answer...
Before Operating the Handset Flexible CO Keys Flexible CO Keys A flexible CO key can be used either to seize a line in order to make or receive an outside call (F-CO key), or used as a function key. Move the Joystick to display the flexible CO key list.
Operation Making Calls Making Calls Calling To an extension Extension No. To an outside party To use the Line Access Numbers Outside Phone No. Outside Line Group No. To use Flexible CO Keys (idle CO key no. [0-9, , #]) Outside Phone No.
Page 22
Operation Calling *2 *3 To use the PBX System Phonebook Name (if required) To use the PBX Extension Phonebook Name (if required) One-touch Dialling To store (“ PBX Program”) (F-CO Key) Desired No. To dial (One-touch Dialling key) Hot Line To store Desired Phone No.
Page 23
Operation System Speed Dialling To dial System Speed Dial No. (3 digits) Doorphone Call Doorphone No. (2 digits) Automatic Callback Busy To set To cancel While hearing a busy tone To answer from an idle extension To answer from an idle outside line While hearing a callback ring While hearing a callback ring Outside Phone No.
Operation Searching for an item stored in the Phonebook Searching for an item stored in the Phonebook You can search for an item in the Phonebook by following the steps below. Handset Phonebook Scrolling through all items Press the Left Press the Joystick UP or DOWN repeatedly.
Page 25
Operation – Search for another item by pressing the dial key that corresponds to the letter you are searching for. If there is no entry that corresponds to the letter you selected, the next entry will be displayed. PBX System Phonebook Scrolling through all items Press the Left Press the Left...
Page 26
Operation PBX Extension Phonebook Scrolling through all items Press the Left Press the Left Press the Left Press the Joystick UP or Soft Key. Soft Key. Soft Key. DOWN repeatedly. Searching by name or first character(s) of name Enter name or first character of the desired name.
Operation Receiving Calls Receiving Calls Receiving An Intercom Call/An Outside Call/An Group Call An Intercom Call An Outside Call on a specific line (rapidly flashing F-CO key [0-9, , #]) (rapidly flashing F-CO key) Call Pickup Directed Extension No. Group Group No.
Operation Caller ID Caller ID If an outside call that contains Caller ID information (a caller’s name and telephone number) is received, this information will be logged in the incoming call log and displayed on the handset in one of the two following ways. –...
Operation During a Conversation During a Conversation Transferring a Call To an extension Extension No. To an outside party Outside Phone No. Outside Line Group No. Holding To hold (Regular Hold) To hold (Exclusive Call Hold) To retrieve a call An Intercom Call An Outside Call (slowly flashing F-CO key [0-9, , #])
Operation • When you hold several outside calls, you need to assign F-CO Keys (Single Line/Loop Line/Trunk Group) as necessary beforehand. • For more information, refer to the user documentation for your PBX. Useful Features Useful Features Call Forwarding Both Calls Outside Calls Intercom Calls Destination...
Page 31
Operation Call Waiting To set/cancel for intercom calls No call Tone To set/cancel for outside calls No tone Tone To talk to the new party (While hearing the Call Waiting tone) To terminate a current status To hold and then talk to the new party (rapidly flashing F-CO Key [0-9, , #]) (rapidly flashing F-CO Key) Disregard this step if both parties are extensions.
Page 32
Operation Absent Message To set Will Return Soon Gone Home At Ext %%%% + Extension no. Back at %%:%% + Hour:Minute Out until %%/%% + Month/Day In a Meeting Enter required no. To cancel Log-in/Log-out For Log-in Specified ICD Group* Extension No. For Log-out * ICD Group: Incoming Call Distribution Group Extension Feature Clear...
Page 33
Operation Message Waiting Called extension To call back Extension Dial Lock To lock To unlock Extension PIN* (max. 10 digits) * PIN: Personal Identification Number *1 You cannot send a call waiting tone when – the called party has not set the Call Waiting feature. –...
Operation Making Use of the Voice Mail Service Making Use of the Voice Mail Service Listening to a Message From your own extension KX-TVM series Listen to Message VPS* Extension No. Deliver Message Mailbox Password Mailbox Management Automated Attendant · If you have no password, you can skip the last step. Message Notification Other Features End Call...
Using the Handset Phonebook Handset Phonebook Handset Phonebook You can store up to 100 items with names, phone numbers, and category numbers in the handset for easy access. You can set unique Ringer/LED/Vibrate patterns for each category to identify incoming calls. All Phonebook items are stored in alphabetical order. For security purposes, you can lock the Phonebook.
Using the Handset Phonebook Editing a Stored Item Editing a Stored Item Enter name. Press the Left Press the Joy- Move the Soft Key. stick. Joystick UP or DOWN. Select the desired Press the Joystick. Select “Edit”. Press the Joy- item.
Using the Handset Phonebook Storing an Item Using the Predialling Storing an Item Using the Predialling Enter phone number. Enter name. (max. 32 digits) (max. 16 characters) Press the Joystick. Edit phone number. (max. 32 digits) Press the Joy- Move the Joy- Press the Joy- stick.
Using the Handset Phonebook Storing an Item Using the Incoming Call Log Storing an Item Using the Incoming Call Log Press the Right Press the Right Soft Key. Soft Key. Select the desired Press the Joy- item. stick. Move the Joystick UP or DOWN. Enter a name, phone number, and select the category number (1-9) or Off.
Using the Handset Phonebook Storing an Item Using the PBX System Phonebook Storing an Item Using the PBX System Phonebook Enter name. Press the Left Press the Left Press the Move the Soft Key. Soft Key. Joystick. Joystick UP or DOWN. Select the Press the Joy- Select “Save...
Using the Handset Phonebook *2 Press to confirm each entry. (name: max. 16 characters/phone number: 32 digits) • To search for an item in the Phonebook, see page 24. Editing Category Names Editing Category Names You can edit the names of the categories in the Handset Phonebook. Press the Joy- Press the Joy- Select “Dis-...
Using the Handset Phonebook Assigning Hot Keys Assigning Hot Keys You can assign a phone number stored in the Handset Phonebook to a key to be used as a Hot Key. Enter name. Press the Left Press the Joy- Move the Joy- Soft Key.
Using the Handset Phonebook Entering Characters Entering Characters You can enter characters and digits using the dialling keys. A, a You can select one of 3 character modes by pressing the Right Soft Key B, b C, c while entering a name. The function icon above the soft key displays the current character mode.
Using the Handset Phonebook Character Mode Table Character Mode Table Keys ABC (Alphabet) 0-9 (Numeric) +ÀÂ (Extended) • Press before or after entering a character to change between uppercase and lowercase. • Pressing a key repeatedly will cycle through the characters associated with that key. For example, to enter the letter “C”, press three times.
Using the Handset Phonebook Locking the Handset Phonebook Locking the Handset Phonebook You can lock/unlock the Phonebook while the handset is in standby mode. Locking the Handset Phonebook Locking the Handset Phonebook Press the Left Soft Key for more Locked. than 2 seconds.
Deleting Stored Items Outgoing Call Log Outgoing Call Log Press the Right Soft Select the desired item. Press the Joystick. Select “Delete”. Key. Press the Joystick. Select “Yes”. Press the Joystick. Incoming Call Log Incoming Call Log Press the Right Soft Press the Right Soft Select the desired Press the Joystick.
Configuring Handset Settings Changing the Initial Settings Changing the Initial Settings You can customise the handset by editing the settings found under “Setting Handset” in the menu list, as follows: Press the Joy- Press the Joy- Select the desired Press the Joy- Select “...
Configuring Handset Settings Handset Setting Menu Layout Handset Setting Menu Layout [Main Item] [Sub Item] Incoming Option Ringer Volume Setting Handset Ringer Type Vibrate Ring On Charger Memo Alarm Headset Tone Talk Option Speaker Volume Receiver Volume Headset Volume Headset Mic Vol Talk On Charger Answer Option Any Key Answer...
Page 49
Configuring Handset Settings Incoming Option Sub Item Description Setting Default Adjusts the ringer volume. Step Up Ringer Volume Step Down Level 3 Level 1-6 Bell 1-6 Ringer Type Ringer Pattern Selects the ringer pattern for Bell 1 – Intercom Ring each type of call.
Page 50
Configuring Handset Settings Sub Item Description Setting Default Bell 1-6 Memo Alarm Ringer Pattern Selects the ringer pattern for Bell 1 each Memo Alarm. Melody 1-9 LED Pattern Selects the LED pattern for each Memo Alarm. Green Green Orange R→G→O Single Vib.
Page 51
Configuring Handset Settings Answer Option Sub Item Description Setting Default Answers a call by pressing any Any Key Answer dialling key. Answers a call while charging by Quick Answer just lifting up a handset from the charger. Selects the types of calls that can Int Only Auto Answer be answered by AUTO...
Page 52
Configuring Handset Settings Display Option Sub Item Description Setting Default Selects the display language. Auto Language English Auto Español FRANÇAIS Turns on the backlight of the LCD Backlight and keypad. On & Receiving Adjusts the LCD contrast. Level 1-5 Level 3 LCD Contrast Selects the display in standby H/S No.
Page 53
Configuring Handset Settings Tone Option Sub Item Description Setting Default Turns the key tone on or off. Key Tone Selects whether the range alarm Range Alarm tone rings or not. System Option Sub Item Description Setting Default Registers a handset to a base. Base 1-4 Not stored Register H/S...
Page 54
Configuring Handset Settings Other Option Sub Item Description Setting Default Changes the handset password Enter Old Password. Change Password (4 digits) used for unlocking the ↓ Handset Phonebook and using the “Reset Handset” option. Enter New Password. 1234 ↓ Verify New Password. Enters the line access code that Select a number, then No.1: 9...
Configuring Handset Settings Memo Alarm Setting Memo Alarm Setting An alarm will sound at the set time. A memo can also be displayed. Memo Alarm is available only when handset is within range of a CS. To set Press the Joy- Press the Joy- Select the alarm Press the Joy-...
Page 56
Configuring Handset Settings To delete the alarm mode setting Press the Joy- Press the Joy- Select the alarm Press the Right Select “ Memo stick. stick. number. (1-3) Soft Key. Alarm”. Select “Yes”. Press the Joystick. To stop the alarm Press all keys other than soft keys.
Troubleshooting and Error Messages Troubleshooting Troubleshooting Problem Possible Cause Solution The handset does not The battery is drained. Charge the battery fully. work. (See “Charging the Battery” on page The power is OFF. • Turn it ON. (See “Location of Controls” on page 7.) •...
Page 58
Troubleshooting and Error Messages Problem Possible Cause Solution Two short beeps are The radio signal is weak. Move closer to the CS. heard during a conver- sation. The charge indicator The charger is not connected • Make sure the battery is inserted flashes red rapidly.
Troubleshooting and Error Messages Error Messages Error Messages Error Message Possible Cause Solution The handset has been cancelled Consult your dealer. Register Unit or the handset has not been reg- istered. The handset is out of range. Move closer to the CS. No Service The CS is turned off.
Important Information Battery Information Battery Information After your Panasonic battery is fully charged (at 25 °C [77 °F]): Operation Operating Time While in use (Talk) Up to about 10 h While not in use (Standby) Up to about 168 h •...
Important Information Important Safety Instructions Important Safety Instructions When using your telephone equipment, basic safety precautions, including those below, should always be followed to reduce the risk of fire, electric shock and injury to persons. 1. Read and understand all instructions. 2.
Page 62
Important Information CAUTION To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the AC adaptor, battery and charger indicated in this manual. 2. Do not dispose of the battery in a fire. They may explode. Check with local authorities for special disposal instructions.
Page 63
Important Information Take special care to follow the safety suggestions listed below. Safety 1. The product should only be connected to a power supply of the type described in this manual or as shown on the label on the product. 2.
Important Information For Best Performance Operating Range 1. The range of operation depends on the topography of your office, weather, or usage conditions, because signals are transmitted between the CS and the handset by radio waves. 2. Normally, you get greater range outdoors than indoors. If there are obstacles such as walls, noise may interfere with your telephone calls.
Page 66
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 http://www.panasonic.ca Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.