Table of Contents
Advertisement
To dial
To set
While hearing a busy tone
To answer from an idle extension
While hearing a callback ring
*1 To assign a phone number to a Hot Key, see page 41.
*2 When a call is made using the PBX System Phonebook, the called party's name is not stored in
the Outgoing Call Log. To log the name as well as the number, copy the item into the Handset
Phonebook before dialling it. (See page 39.)
*3 To store an item in the Phonebook, see page 35.
To search for an item stored in the Phonebook, see page 24.
*4 This step can be omitted.
•
To enter characters, see page 42.
•
You can confirm that the number was dialled correctly before calling (Predialling) by
entering the number, then pressing
•
To clear an entire number while predialling, press
•
If an outside call is received from a phone number stored in the Handset Phonebook,
the number and name of the caller will be displayed in the call log.
•
To cancel dialling, press
•
If "
" flashes, move closer to the CS and dial again.
•
For more information, refer to the user documentation for your PBX.
System Speed Dialling
System Speed Dial No. (3 digits)
Doorphone Call
Doorphone No. (2 digits)
Automatic Callback Busy
.
To cancel
To answer from an idle outside line
While hearing a callback ring
Outside Phone No.
.
for more than 1 second.
Operation
23
Advertisement
Table of Contents
