Play; Play A Disc - Philips OTT2000 User Manual

4 Play

Play a disc

1
Press SOURCE repeatedly to select CD
source.
2
Press to open the disc compartment.
3
Insert a disc with the printed side facing up,
and then close the disc compartment.
4
Play starts automatically. If not, press
Pause/resume play
• During play, press
play.
Skip to a track
For CD:
• Press / to select another track.
For MP3 disc and USB:
1
Press PRESET/ALBUM
album or a folder.
2
Press / to select a track or a file.
Search within a track
1
During play, press and hold
2
Release to resume normal play.
10 EN
.
to pause/resume
/ to select an
/ .
Program tracks
Note
•
You can program tracks only when the play stops.
•
You can program a maximum of 20 tracks.
1
In playback stop mode, press CLOCK/
PROG to activate the program mode.
» [MEMORY] (memory is displayed on
the screen.
2
For MP3 tracks, press
album.
3
Press / to select a track, then press
CLOCK/PROG to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press to play the programmed tracks.
• To erase the program, in the stop
position, press .
• The program mode stops automatically
if no button is pressed for about 10
seconds.
Display play information
During playback, press and hold INFO.
• For CD:
• Lap time of current track
• Lap time remaining of current track
• Total lap time of all tracks
• Total lap time remaining of all tracks
• For MP3 disc and USB: ID3 information,
such as [TITLE] (title), [ARTIST] (artist),
[ALBUM] (album).
Search tracks
You can search a track by title or folder name
within a disc/USB.
Note
•
For MP3 files, the bit rates from 32 kbps to 320 kbps
are supported.
/ to select an